User's Manual
Chapter3 Hardware & Peripheral
Installation
a
3 Overview of Hardware Installation & Upgrading
The Mobile Data Terminal consists of a industrial computer that is housed in a
ruggedized aluminum enclosure. Any memory module or storage maintenance or
hardware upgrades can be completed after removing the rear side RAM door/ side
cover,or remove the front panel to install.
3.2 Installing the Storage Device and SIM Card
TREK-773 has a side door and a user can easily install a SIM card or storage (CFast
or SD) card. The CFast card is the main bootable storage card which has the
operating system pre-installed from Advantech. The CFast slot with an ejector (on the
top side) can eject the CFast card from the socket with a press. The SD
card acts as
secondary storage in TREK-773. The system is NOT allowed boot up from SD.
Note! Please do NOT paste any sticker or label on a CFast or SD card; it might
cause jamming and not be able to be ejected from the slot/socket.
Chapter 3 Hardware & Peripheral
Installation
SDCard
CfastCard
SIM