User's Manual

56
www.advantech.com
a. Digital Output Î isolated relay driver output
b. Digital Input Î isolated dry contact input
Figure 6.15 Digital in
Figure 6.15 Digital out
6.5  Video in Test

There are two video in, please connect camera on each port, CAM1 &
CAM2, choose Channel 1 on [Switch to], then panel will show the image
which camera1 has taken, it will recover to the same status after 10 sec,
then change to Channel 2, Panel will show what appears on camera2, and
come back to the same status after 10 sec.