User's Manual

Note!  Ignition  on/off  setting : The TREK-550 supports an ignition on/off 
func-  tion so that you can power on/off the TREK-550 via the ignition
signal/
 voltage. Either connect the TREK-550's "ignition" pin to ignition  and 
the TREK-550 "+-"  to "+-" ; or connect the TREK-550's "ignition &
+" pins together
 with power  source's  "+" , and  "-" to "-". Please  also
set
 the "power on after power  failure” function to "always on" in
BIOS.(for
 BIOS settings, please see Appendix D). The delay on/off
will be active
 once the  ignition  on/off is selected.
Table 2.1: Pin Definition of Power Cord
Pin  Definition  Color
1  +  yellow
3
 -  black 
4  Ignition  white
Power Connector
 

Molex Manufacturer part no. 0430451200
Power Connector
Pin Signal Pin Signal
1 Chassis Ground 2 Ground
3 Ground 4 (Reserved)
5
(Reserved) 6 (Reserved)
7
Power Input (6~36 VDC) 8 Power Input (6~36 VDC)
9
Acc Ignition Input 10 Ground
11
(Reserved) 12 Power Button Input
Mating power cable
Advantech p/n : 1700018306 A Cable 2*6P-3.0/fuse 180cm TREK
Manufacturer p/n: Best Technology Enterprise 900-1200-180R
