User`s manual

36 TPC-1560 User's Manual
Serial Port Settings
The COM3 serial port on the TPC-1560 is selectable RS-232, RS-422 or
RS-485. This port is designed with auto data flow control capability.
That is to say, when the two wired RS-485 communication is activated,
the TPC-1560 can automatically detect the data flow direction at this
port. Its setting are are selected by DIP switches SW1, SW2, and
jumpers JP5~JP12. These two switches are located near the lower edge
of the opening when the CPU board cover is removed, and the
JP5~JP12 are just beside the 24VDC power connector.
A.1 Baud Rate Settings (SW1)
= On
= Off *= Default