User's Manual
Table Of Contents
- Chapter 1 General Information
- Chapter 2 System Setup
- Chapter 3 System Tuning
- Chapter 4 Windows CE .NET 4.2
- Figure 4.1: Windows CE on TPC-60S
- 4.1 TPC Utilities
- 4.2 Networking
- 4.2.1 Network via Ethernet
- 4.2.2 Network via Serial Port
- Figure 4.24: PC Connection
- Figure 4.25: PC Connection Properties
- Figure 4.26: Change Connection
- Figure 4.27: Change Connection
- Figure 4.28: COM1 Set
- Figure 4.29: Microsoft ActiveSync
- Figure 4.30: Select Connection Setting
- Figure 4.31: Configure Connection Setting
- Figure 4.32: Get Connected
- Figure 4.33: Run Repllog.exe on the TPC
- Figure 4.34: Connection on the TPC
- Figure 4.35: Connection on the Host PC
- Figure 4.36: Explore the TPC
- 4.2.3 Network via USB Client Port
- 4.3 Application Program Development
- 4.4 Wireless LAN Utility for TPC-61S
- Appendix A Watchdog Timer Programming
- Appendix B Fuse Specifications
- Appendix C Pin Assignments
49 Chapter 4
4.4 Wireless LAN Utility for TPC-61S
TPC-61S supports wireless LAN with a built in 11 Mbps PCMCIA card,
which is compliant with IEEE802.11b. It can be operated in Ad-Hoc or
infrastructure mode. The infrastructure mode is used as an example in
this section. Windows CE .NET on TPC-61S provides a wireless LAN
utility for users to configure the PCMCIA wireless card to connect to a
wireless LAN network.
Open the Wireless LAN Utility
Please select a network you want to link and then press ‘connect’ to
connect. If you want to configure properties, please double click the
selected item.
Figure 4.40: Open WLAN Utility