User's Manual
Table Of Contents
- Chapter 1 General Information
- Chapter 2 System Setup
- Chapter 3 System Tuning
- Chapter 4 Windows CE .NET 4.2
- Figure 4.1: Windows CE on TPC-60S
- 4.1 TPC Utilities
- 4.2 Networking
- 4.2.1 Network via Ethernet
- 4.2.2 Network via Serial Port
- Figure 4.24: PC Connection
- Figure 4.25: PC Connection Properties
- Figure 4.26: Change Connection
- Figure 4.27: Change Connection
- Figure 4.28: COM1 Set
- Figure 4.29: Microsoft ActiveSync
- Figure 4.30: Select Connection Setting
- Figure 4.31: Configure Connection Setting
- Figure 4.32: Get Connected
- Figure 4.33: Run Repllog.exe on the TPC
- Figure 4.34: Connection on the TPC
- Figure 4.35: Connection on the Host PC
- Figure 4.36: Explore the TPC
- 4.2.3 Network via USB Client Port
- 4.3 Application Program Development
- 4.4 Wireless LAN Utility for TPC-61S
- Appendix A Watchdog Timer Programming
- Appendix B Fuse Specifications
- Appendix C Pin Assignments
TPC-60S Series User Manual 28
Web Server Root: Input the root path of the web server here. The root
path will only be effective after the machine has been rebooted.
FTP Server Root: Input the root path of the ftp server here. The root path
will only be effective after the machine has been rebooted.
4.1.3 Advantech Tools
There are several useful tools in the Advantech program. Please
go to “Start” ! “Programs” ! “Advantech” to run the tools as
shown in Figure 4.12. The tools include “ActiveSync”, “Registry
Editor”, “Registry Saver”, “Remote Display Application”, “TPC CE
Notepad”, “TPC Configurator” and “TPC Version Information”.
Figure 4.12: Advantech Tools
ActiveSync
This program synchronizes data and monitors the connection between
TPC-60S panel computers and their host computer. By default, it will be
executed automatically when you want to establish a connection to a tar-
get device with ActiveSync.