User's Manual
Table Of Contents
- Chapter 1 General Information
- Chapter 2 System Setup
- Chapter 3 System Tuning
- Chapter 4 Windows CE .NET 4.2
- Figure 4.1: Windows CE on TPC-60S
- 4.1 TPC Utilities
- 4.2 Networking
- 4.2.1 Network via Ethernet
- 4.2.2 Network via Serial Port
- Figure 4.24: PC Connection
- Figure 4.25: PC Connection Properties
- Figure 4.26: Change Connection
- Figure 4.27: Change Connection
- Figure 4.28: COM1 Set
- Figure 4.29: Microsoft ActiveSync
- Figure 4.30: Select Connection Setting
- Figure 4.31: Configure Connection Setting
- Figure 4.32: Get Connected
- Figure 4.33: Run Repllog.exe on the TPC
- Figure 4.34: Connection on the TPC
- Figure 4.35: Connection on the Host PC
- Figure 4.36: Explore the TPC
- 4.2.3 Network via USB Client Port
- 4.3 Application Program Development
- 4.4 Wireless LAN Utility for TPC-61S
- Appendix A Watchdog Timer Programming
- Appendix B Fuse Specifications
- Appendix C Pin Assignments
25 Chapter 4
Misc
There are several functions provided in the Misc page as shown in the fig-
ure below.
Figure 4.8: Misc Page
CompactFlash Disk Folder Name: There is a pull-down menu to set the
folder name of the CompactFlash memory card. The default folder name
is “Storage Card”.
Startup Programs: You can easily set the startup programs without edit-
ing. The programs listed in the combo box will be automatically executed
after the system has successfully booted. Click the “Add” button to insert
a file to the startup. If you would like to remove the file from the startup
or the combo box, please click “Delete”.
Warning Do NOT try to key in the folder name in the text
box directly. If the CompactFlash folder is
renamed to some name that is beyond the
given list, there will be irreversible problems for
users’ application program settings.
Note Do NOT try to insert a NON-executable file into
the startup program.