User's Manual
Table Of Contents
- Chapter 1 General Information
- Chapter 2 System Setup
- Chapter 3 System Tuning
- Chapter 4 Windows CE .NET 4.2
- Figure 4.1: Windows CE on TPC-60S
- 4.1 TPC Utilities
- 4.2 Networking
- 4.2.1 Network via Ethernet
- 4.2.2 Network via Serial Port
- Figure 4.24: PC Connection
- Figure 4.25: PC Connection Properties
- Figure 4.26: Change Connection
- Figure 4.27: Change Connection
- Figure 4.28: COM1 Set
- Figure 4.29: Microsoft ActiveSync
- Figure 4.30: Select Connection Setting
- Figure 4.31: Configure Connection Setting
- Figure 4.32: Get Connected
- Figure 4.33: Run Repllog.exe on the TPC
- Figure 4.34: Connection on the TPC
- Figure 4.35: Connection on the Host PC
- Figure 4.36: Explore the TPC
- 4.2.3 Network via USB Client Port
- 4.3 Application Program Development
- 4.4 Wireless LAN Utility for TPC-61S
- Appendix A Watchdog Timer Programming
- Appendix B Fuse Specifications
- Appendix C Pin Assignments
TPC-60S Series User Manual 20
Chapter 4 Windows CE .NET 4.2
The TPC-60S operator interface terminals are designed for Windows CE.
Windows CE is a compact operating system that occupies less storage
space and use less system resources compared with other operating sys-
tems. By its modular nature, it is possible to choose the functions that are
useful for a specific application. This not only reduced the system
resources required, it also reduces start-up time. In the field of industrial
automation or for operator interface terminals, this is an appealing feature
because the impact of downtime is minimized. Furthermore, the small
storage space required makes it possible to install the operating system on
a reliable solid-state disk.
Figure 4.1: Windows CE on TPC-60S
Note The default version of Windows CE in TPC-60S
series is the English version. Please contact
your local Advantech representative for local
language support.
Note: The TPC-60S series also provides Remote
Desktop Connection in Windows CE but the max-
imum resolution supported is only 320 x 240.