User's Manual
Table Of Contents
- Chapter 1 General Information
- Chapter 2 System Setup
- Chapter 3 System Tuning
- Chapter 4 Windows CE .NET 4.2
- Figure 4.1: Windows CE on TPC-60S
- 4.1 TPC Utilities
- 4.2 Networking
- 4.2.1 Network via Ethernet
- 4.2.2 Network via Serial Port
- Figure 4.24: PC Connection
- Figure 4.25: PC Connection Properties
- Figure 4.26: Change Connection
- Figure 4.27: Change Connection
- Figure 4.28: COM1 Set
- Figure 4.29: Microsoft ActiveSync
- Figure 4.30: Select Connection Setting
- Figure 4.31: Configure Connection Setting
- Figure 4.32: Get Connected
- Figure 4.33: Run Repllog.exe on the TPC
- Figure 4.34: Connection on the TPC
- Figure 4.35: Connection on the Host PC
- Figure 4.36: Explore the TPC
- 4.2.3 Network via USB Client Port
- 4.3 Application Program Development
- 4.4 Wireless LAN Utility for TPC-61S
- Appendix A Watchdog Timer Programming
- Appendix B Fuse Specifications
- Appendix C Pin Assignments
TPC-60S Series User Manual 4
1.3 LCD Specifications
1.4 Touchscreen Specifications
Display Type Color STN LCD
Size (diagonal) 5.7”
Maximum Resolution 320 x 240 (QVGA)
Maximum Colors 256
Pixel Pitch (W x H, mm) 0.12 x 0.36
Viewing Angle 110°
Luminance (cd / m2) 201
Contrast Ratio 10
Operating Temperature (¢J) 0 ~ 50 (Ambient)
Control Contrast Adjustable
Backlight 1 CCFL
Backlight MTBF 40,000 hours
Touch Type Resistive
Base Glass Construction Tempered Glass
Resolution Continuous
Light Transmission 75% typical
Controller SPI (AD7846)
Power Rating 5 VDC
Software Driver Windows CE (embedded)
Durability 10 million times with a 8 mm
diameter silicone rubber finger
Note There is no pointer/cursor shown using the
touch screen. The cursor only appears when
closing or minimizing the window.