User manual

21 TPC-1071H/1271H/1571H User Manual
Appendix A Jumper & Dip Switch Setting List and DIO Pin Assignment and Wiring
A.3.4 SW4 LCD Resolution Select
SW4 is used to select LCD Resolution
Default settings
A.3.5 SW5 & SW6 Termination Resistor Selection
SW5 and SW6 are used to select the Termination Resistor (120 ohm) for long dis-
tance transmission or device matching
Default Setting
Description On Off
Bit 1 GPI_LCDSEL0
Depends on BIOS definitions
Bit 2 GPI_LCDSEL1
Bit 3 GPI_LCDSEL2
Bit 4 GPI_LCDSEL3
TPC-1071H TPC-1271H TPC-1571H
Bit 1 On Off On
Bit 2 On On Off
Bit 3 On On On
Bit 4 On On On
Description On Off
Bit 1 Termination resistor select Enable Disable
Bit 2 Termination resistor select Enable Disable
TPC-1071H TPC-1271H TPC-1571H
Bit 1 Off Off Off
Bit 2 Off Off Off