User manual

TPC-1071H/1271H/1571H User Manual 14
Figure 2.4 Power Receptor & Button Pin Assignment
4. Plug the power lines into the system power receptor.
5. Push the power button to power on the system (figure 2.4).
6. Calibrate the touchscreen (click "PM" in the bottom corner).
2.1.1 Installing the Drivers
After installing your system software, you will be able to set up the Ethernet, VGA,
and touchscreen functions. All drivers are stored in a DVD entitled “TPC-1071H,
TPC-1271H or TPC-1571H” which can be found in your accessory box.
The various drivers in the DVD have their own text files which help users install the
drivers and understand their functions. These files are a very useful supplement to
the information in this manual.
Note! If you want to install the touchscreen driver & use the touchscreen utility,
please refer the user manual which is "PenMount 6000 Installation-
Guide" on the DVD.
Note! The drivers and utilities used for the TPC-1071H, TPC-1271H and TPC-
1571H panel PCs are subject to change without notice. If in doubt,
check Advantech's website or contact our application engineers for the
latest information regarding drivers and utilities.