User Manual TPC-1071H/1271H/ 1571H Touch Panel Computer With Intel® Atom™ Dual Core Processor
Copyright The documentation and the software included with this product are copyrighted 2011 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Safety Instructions 1. 2. 3. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
TPC-1071H/1271H/1571H User Manual vi
Contents Chapter 1 General Information ............................1 1.1 1.2 Introduction ............................................................................................... 2 Packing List............................................................................................... 2 1.2.1 TPC-1071H and 1271H ................................................................ 2 1.2.2 TPC-1571H ...................................................................................
A.4 A.3.1 SW1 TS Type Setting ................................................................. 20 A.3.2 SW2 LCD Controlled Function.................................................... 20 A.3.3 SW3 FPGA ................................................................................. 20 A.3.4 SW4 LCD Resolution Select....................................................... 21 A.3.5 SW5 & SW6 Termination Resistor Selection.............................. 21 DIO Board Pin Assignment and Wiring..................
Chapter 1 1 General Information
1.1 Introduction The TPC-1071H/1271H/1571H Touch Panel Computers are state-of-the-art Human Machine Interfaces featuring 10"/ 12"/ 15" displays with Intel Atom processors 400 and 500 Series with Intel 82801HM I/O Controller and the following key features: Fanless By using a low-power processor, the system does not have to rely on fans, which often are unreliable and causes dust to circulate inside the equipment.
1.3.1 System Kernel CPU: Intel® Atom™ D525 1.8GHz BIOS: AMI BIOS System Chipset: ICH8M VGA: Integrated in ICH8M Ethernet: 10/100/1000Base-T Watchdog Timer: – SCH3106 watchdog timer; 1 second timeout period Storage: CompactFlash® slot and SATA HDD x 1 1.3.2 I/O Ports TPC-1071H/1271H/1571H: 3 serial ports: RS-232 x 2 (w/ isolation), RS-422/485 x 1 (w/isolation) 2 RJ-45 Ethernet port 2 USB 2.0 Ports: compliant with USB 2.0 and 1.1. (Host) 1.3.
1.4 LCD Specifications TPC-1071H/1271H/1571H Display Type TFT LCD Size (diagonal) 10.4"/ 12.1"/ 15" Maximum Resolution 800x600 / 800x600 / 1024x768 Maximum Colors 262K Viewing Angle 140°/110°, 160°/140°, 160°/140° Luminance (cd / m2) 500 / 450 / 350 Contrast Ratio 500:1 / 700:1 / 700:1 Operating Temperature -30 ~ 85°C Backlight LED Note! There might be several bright or dark pixels on the LCD. This phenomenon is normal in today’s LCD manufacturing. 1.
The arrangement of the I/O ports is shown in in Figure 1.1 and 1.2. Figure 1.2 TPC-1571H - I/O Port Arrangement 5 TPC-1071H/1271H/1571H User Manual General Information Figure 1.1 TPC-1071H/1271H - I/O Port Arrangement Chapter 1 1.
1.8 Panel Mounting 1. 1. 2. 3. There is an adhesive waterproof gasket on the AL front bezel. Make sure the waterproof gasket is in position before installing TPC into the panel opening. Install the TPC into the panel opening. Find the eight clamps and eight long screws in the accessory pack. Hook the clamps to the holes around the four sides of the bezel. Insert the screws into every clamp and fasten them. These screws will push the mounting panel and fix the unit.
1.9.1 TPC-1071H General Information 278.50 25 REF 72.3 3 227 214 287 160.1 Weight: 3kg Dimensions (W x H x D): – 287 x 227 x 72.3 mm (11.29" x 8.94" x 2.84") Cutout: – 279.5 x 219 mm 218.50 Figure 1.5 TPC-1071H Dimensions 7 Chapter 1 1.
1.9.2 TPC-1271H Weight: 4.57kg Dimensions (W x H x D): – 311 x 237 x 73.1 mm (12.24" x 9.33" x 2.88") Cutout: 302 x 228 mm 20.6 3 73.1 25 REF 301 227 237 247 311 185.50 Figure 1.
24.5 1.27 373 78.50 4.5 383 306.1 307 Figure 1.7 TPC-1571H Dimensions 9 TPC-1071H/1271H/1571H User Manual General Information 230.1 Weight: 5.5kg Dimensions (W x H x D): – 383 x 307 x 78.5 mm (15.08" x 12.09" x 3.09") Cutout: 374.5 x 298.5 mm 297 Chapter 1 1.9.
TPC-1071H/1271H/1571H User Manual 10
Chapter 2 System Setup 2
2.1 System Setup You can easily get TPC started by following the below steps. 1. Unpack the TPC package. Check the packing list at the beginning of this manual to make sure all items have been included. Figure 2.1 Unpack the Package 2. Install a CompactFlash card containing Windows CE, Embedded Windows XP or another operating system.
Chapter 2 Warning! It is suggested to turn OFF system power as you plug in or pull out the memory card, even though the CompactFlash memory is hot swappable. 3. Connect the power connector to the 24 VDC power lines. The power lines can either be of some power adapter or in-house power source. Figure 2.3 Power Connector and Power Lines 13 TPC-1071H/1271H/1571H User Manual System Setup Figure 2.
Figure 2.4 Power Receptor & Button Pin Assignment 4. 5. 6. Plug the power lines into the system power receptor. Push the power button to power on the system (figure 2.4). Calibrate the touchscreen (click "PM" in the bottom corner). Note! If you want to install the touchscreen driver & use the touchscreen utility, please refer the user manual which is "PenMount 6000 InstallationGuide" on the DVD. 2.1.
Chapter 3 3 Features in Windows XP Embedded
3.1 Features in Windows XP Embedded TPC product supports the embedded Windows platform. This section outlines the important features (EWF and HORM), that are provided in Windows XP embedded. 3.2 EWF EWF stands for Enhanced Write Filter. It provides an upper filter in the storage device driver stack that redirects disk write operations to volatile (RAM) or non-volatile (disk) storage. EWF protects a volume from write access. The benefits are as the following.
Appendix A A Jumper & Dip Switch Setting List and DIO Pin Assignment and Wiring
A.1 Jumper and DIP Switch Settings If you need to adjust the jumper or DIP switch settings refer to the information below. A.1.1 Jumper and Switch Locations Figure A.
A.2.1 JP1 LCD Power Select JP1 is used to select LCD power Description 1-3 & 2-4 +5V is used to supply LCD panel 3-5 & 4-6 +3.3V is used to supply LCD panel* * Default setting A.2.2 JP2 CMOS Clear Select JP2 is used to select CMOS enable/disable Description 2-3 Enable (Clear CMOS) 1-4 Disable* * Default setting 19 TPC-1071H/1271H/1571H User Manual Appendix A Jumper & Dip Switch Setting List and DIO Pin Assignment and Wiring A.
A.3 DIP Switch Settings A.3.1 SW1 TS Type Setting SW1 is used to select TS type setting Description On Off Bit 1 T/S type 4,8 WIRE 5 Wire* Bit 2 Baud Rate 9600 19,200* * Default setting TPC-1071H TPC-1271H TPC-1571H Bit 1 Off Off Off Bit 2 Off Off Off A.3.
SW4 is used to select LCD Resolution Description On Bit 1 GPI_LCDSEL0 Bit 2 GPI_LCDSEL1 Bit 3 GPI_LCDSEL2 Bit 4 GPI_LCDSEL3 Off Depends on BIOS definitions Default settings TPC-1071H TPC-1271H TPC-1571H Bit 1 On Off On Bit 2 On On Off Bit 3 On On On Bit 4 On On On A.3.
A.4 DIO Board Pin Assignment and Wiring A.4.1 DIO PIN Assignment A.4.
A.4.4 Isolated Digital Output 23 TPC-1071H/1271H/1571H User Manual Appendix A Jumper & Dip Switch Setting List and DIO Pin Assignment and Wiring A.4.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
