User manual

TPC-1260H User Manual 12
Figure 2.4: Pin Assignments on the Power Receptor and Power Button
• Step 4: Plug the power lines into the system power receptor.
• Step 5: Push the power button to power on the system as shown in fig-
ure 2.4.
• Step 6: Calibrate the touchscreen. Please go to “Start”, ”Pro-
grams”,‡”PenMount DMC9000 Utilities”->”Control Panel” as shown
in figure 2.5. Then, click the tab “Calibrate” to calibrate by selecting
standard calibration or advanced calibration.
Note
This calibration is for Windows 2000. If your
operating system is Windows CE .NET, the
detailed procedure is described in section 4.1.4.