User manual

TPC-1250H/1550H/1750H User Manual 12
Figure 2.4 Power Receptor & Button Pin Assignment
4. Plug the power lines into the system power receptor.
5. Push the power button to power on the system (figure 2.4).
6. Calibrate the touchscreen (click “PM” in the bottom corner).
2.1.1 Installing the Drivers
After installing your system software, you will be able to set up the Ethernet, VGA,
and touchscreen functions. All drivers are stored in a DVD disc entitled “TPC-
1250H,TPC-1550H and TPC-1750H which can be found in your accessory box.
The various drivers in the DVD disc have their own text files which help users install
the drivers and understand their functions. These files are a very useful supplement
to the information in this manual.
Note! If you want to install the touchscreen driver & use the touchscreen utility,
please refer the user manual which is "PenMount 6000 Installation-
Guide" in the DVD.
Note! The drivers and utilities used for the TPC-1250H, TPC-1550H and TPC-
1750H panel PCs are subject to change without notice. If in doubt,
check Advantech's website or contact our application engineers for the
latest information regarding drivers and utilities.