User manual

TPC-1250H User Manual 10
• Step 4: Plug the power lines into the system power receptor.
• Step 5: Push the power button to power on the system (figure 2.4).
• Step 6: Calibrate the touchscreen (click "PM" in the bottom corner).
Installing the Drivers
After installing your system software, you will be able to set up the Ether-
net, SVGA, and touchscreen functions. All drivers are stored in a CD-
ROM disc entitled “TPC-1250H” which can be found in your accessory
box.
The various drivers in the CD-ROM disc have their own text files which
help users install the drivers and understand their functions. These files
are a very useful supplement to the information in this manual.
Note: If you want to install the touchscreen driver & use
the touchscreen utility, please refer the user
manual which is "PenMount 6000 Installation
Guide" in the CD-ROM.
Note The drivers and utilities used for the TPC-1250H panel PCs
are subject to change without notice. If in doubt, check
Advantech's website or contact our application engineers
for the latest information regarding drivers and utilities.