User manual

39 TPC-1071H/1271H/1571H/1771H User Manu-
Chapter 2 System Setup
2.4 Wake up from Suspend Mode
TPC-1x71H series has four wake-up modes which can let you do versatile setting such as
remote control. You can wake up the system on USB, LAN, touch screen and PS/2. The fol-
lowing table shows each wake-up mode in detail.
2.4.1 Wake-on-LAN
Wake-on-LAN function of TPC-1x71H series is supported in both ACPI (Advanced
Configuration Power management Interface) and APM (Advanced Power Manage-
ment) environments and it can wake the system from S3 and S5. The Wake-on-LAN
API should be installed on your host terminal while TPC-1x71H series which will be
awaked is regarded as a client device. Also, you need to enable the Wake-on-LAN
function on TPC-1x71H series. Please follow the following steps.
1. Enter Network Connections setting, right-click on the Local Area Connection
icon, and select “Properties.”
Wake up from
S3 S5
LAN1 V V
LAN2 V V
Touch screen V V
USB V
PS/2 V
Note!
S3: Sleep state where all system context is lost except system memory. OS
context is maintained within the memory and is not reloaded at startup.
S5: This sleep state looks very much like S4 with the exception of the fact
that the OS context is not stored off. The OS must be reloaded.