User manual

TPC-1071H/1271H/1571H/1771H User Manual 38
Part A: Enable/disable Check Box. Select/deselect the box to enable/disable Pen-
Mount Gestures.
Part B: General Setting
Sensing Time: Move the slider to adjust PenMount Gestures Sensing Time between
200 ms (0.2 sec) and 2500 (2.5 sec). The shorter the sensing time is configured, the
faster the gesture has to be done.
Part C: Gesture Setting
C1 Disable Button: When this button is selected, the gesture is disabled.
C2 Hot-key Configure Button: Configure the hot-keystrokes for specific gesture.
The hot-key can include up to 5 keystrokes. When that gesture is sensed, the config-
ured keystrokes will be reported.
C3 Application Invoke Button: Configure to invoke a specific application with par-
ticular gesture. So that when the gesture is sensed, the specific application will run.
C4 Action Configure Button: Configure to make use of PenMount Gesture AP's
built-in shortcuts. So that when a particular gesture is sensed, a specific action will be
taken. PenMount Gesture AP have the following shortcuts built in:
 Shutdown
 Send Right Mouse Click
 Send Middle Mouse Click
 Mouse Scroll Forward
 Mouse Scroll Backward
 Disable touch function
 Enable touch function
C5 Gesture Select Button: Press this button to select the specific gesture you are
going to configure. When the gesture icon turns to blue, it is enabled. When it is gray,
it is disabled. See the following for details.