User manual

TPC-1071H/1271H/1571H/1771H User Manual 32
2.3.1.2 Setting
1. Operation Mode: This mode enables and disables mouse's ability of dragging
on-screen icons-useful for configuring POS terminals.
– Pen Input Emulation: Select this mode and mouse will emulate Windows
Vista pen input device operation, by which no mouse event will be sent until
the touch is dragged out of range or released from the screen.
– Click on Touch: Select this mode and mouse only provides a click function,
and dragging is disabled.
– Mouse Emulation: Select this mode and mouse functions as normal and
allows dragging of icons.
– Click on Release: Select this mode and mouse only provides a click function
when the touch is released.
2. Beep Sound:
Enable Beep Sound: Turns beep function on or off.
Beep on Pen Down: Beep occurs when pen comes down.
Beep on Pen Up: Beep occurs when pen is lifted up.
Beep on Both: Beep occurs when comes down and is lifted up.
Beep Frequency: Modify sound frequency.
Beep Duration: Modify sound duration.
Kind of Sound: TPC-1x71H series only support Buzzer beep.
3. Cursor Stabilizer: Enable the function support to prevent cursor shake.
4. Use press and hold as right click: You can set the time out and area for you
need