Specifications

SSBP-3000C
Page 38
TABLE 12: COMPUTER TERMINAL COMMANDS FOR RS-232 INTERFACE
Command Description Response
h
Help function
Provides the list of commands that can be used to
modify the status of the SSPB.
<Enter>
ENTER key of keyboard
Provides and refreshes the main menu display on
the computer monitor screen.
txo
Tx PLL stat
The status of the transmission PLL will be
displayed.
tmp
Temperature
The hot spot temperature of the SSPB will be
displayed.
nam
Set unit name Allows for a name to be attributed to the SSPB.
txg
Set Tx gain
Allows for the adjustment of the transmission gain
of the SSPB in dB. (Tx gain range: 53 to 73 dB)
tsw
Tx Switch
Allows for the stand-by unit to be switched on-line
(redundant system only)
txm
Tx Mute
Transmission Mute command. The transmission
path of the SSPB is muted. (no RF output power)
txu
Tx Unmute
Transmission un-mute command. The transmission
path of the SSPB is enabled.
tme
Time(h:m:s)
Current time will be displayed.
(in format hour : minutes : seconds)
dat
Date(d:m:y)
Current date will be displayed.
(in format day : month : year)
snb
Serial number Displays the serial number of the SSPB.
mac
MAC address Displays the main controller address.
cur
Consumption Displays the DC current consumption of the SSPB.
alm
Alarms
Displays the ALARMS of the SSPB.
(OK if no alarm)