User manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Hardware Functionality
- 2.1 Introduction
- 2.2 RS-232/422/485 Interface (COM1~COM2)
- 2.3 Optional RS-232 Interfaces (COM3~COM4)
- 2.4 LAN: Ethernet Connector
- 2.5 Power Inputs
- 2.6 USB Connector
- 2.7 DVI-I Display Connector
- 2.8 Reset Button
- 2.9 Power Button
- 2.10 Audio
- Chapter 3 Initial Setup
- Appendix A System Settings and Pin Assignments
- A.1 System I/O Address and Interrupt Assignments
- A.2 Board Connectors and Jumpers
- A.3 RS-232 Standard Serial Port (COM3~COM4)
- A.4 RS-232/422/485 Serial Port (COM1~COM2)
- A.5 Ethernet RJ-45 Connector (LAN1~LAN2)
- A.7 PS/2 Keyboard and Mouse Connector
- A.8 USB Connector (USB1~USB4 & CN7)
- A.9 VGA Display Connector
- Appendix B Programming the Watchdog Timer
UNO-3072LA User Manual 30
3.5 Mounting UNO-3072LA
There are 3 types of mounting kits for UNO-3000 series:
• Panel mount
• Stand mount
• Wallmount
Pls refer to UNO-3000 Series Accessories Manual
3.6 Installing Power Cable
UNO-3072LA provides an internal
backup power source
so
that it can
provide power for a
PCI Blower, external video card that required addi-
tional power or other external devices. You can use the power cable from
accessory package (see section 1.5).
Yellow +12V
Black GND
Black GND
Red +5V
Note: Due to thermal performance issues, Wallmount
will only support specific models