User's Manual
Table Of Contents
- Table of Contents
- Preface
- Safety Instructions
- Rugged and Ready to Go
- Getting Started
- Installing the Rubber Bumpers
- Removing the Rubber Bumpers
- Using the Power Switch
- Inserting a Memory Card
- Removing a Memory Card
- Installing a 3G SIM Card
- Removing 3G SIM Card (optional)
- Installing a WWAN Module (optional)
- Installing an MSR (optional)
- Installing a 1D Barcode Scanner (optional)
- Installing an RFID (optional)
- Upgrading Components
- Making Connections
- Turning On
- Wireless Connections
- Using the Modules
- Using the Fingerprint Software
- Advanced Settings
- Troubleshooting
- Appendix
S10A User Manual
80
MSR Specifications
Scanner Specifications
Feature Description
Reference Standards ISO 7810, 7811
Recording Method Two-frequency coherent phase (F2F)
Decoding Method
ISO: Track1 - IATA / Track2 - ABA /
Track3 - THRIFT
Speed
Varies from 3 ips to 100 ips
(7cm/s to 250cm/s)
Power Requirement Low voltage operation: 3.3V
Message Format:
RS232C/TTL
Programmable baud rate, (8, N, 1), ASCII
Default = 19200 bps, COM2
Feature Description
Reference Standards ISO 7810, 7811
Recording Method Two-frequency coherent phase (F2F)
Decoding Method
ISO: Track1 - IATA / Track2 - ABA /
Track3 - THRIFT
Speed
Varies from 3 ips to 100 ips
(7cm/s to 250cm/s)
Power Requirement Low voltage operation: 3.3V
Message Format:
RS232C/TTL
Programmable baud rate, (8, N, 1), ASCII
Default = 19200 bps, COM2