User's Manual
Table Of Contents
- Table of Contents
- Preface
- Safety Instructions
- Rugged and Ready to Go
- Getting Started
- Installing the Rubber Bumpers
- Removing the Rubber Bumpers
- Using the Power Switch
- Inserting a Memory Card
- Removing a Memory Card
- Installing a 3G SIM Card
- Removing 3G SIM Card (optional)
- Installing a WWAN Module (optional)
- Installing an MSR (optional)
- Installing a 1D Barcode Scanner (optional)
- Installing an RFID (optional)
- Upgrading Components
- Making Connections
- Turning On
- Wireless Connections
- Using the Modules
- Using the Fingerprint Software
- Advanced Settings
- Troubleshooting
- Appendix
S10A User Manual
44
Using WWAN
WWAN function is optional with S10A. It allows you to make 3G
connection to the internet. See “Installing a WWAN Module
(optional)” on page 12 for installation instruction.
Connecting to WWAN
1. Tap Start > All Programs > Cinterion > HC25 HSDPA USB
Modem > HC25 Connection Manager.
The Cinterion Connection Manager screen appears.
2. On Select Device, select
the HC25 Module.
3. Select the APN Name
checkbox, and enter the
access point name of
your network service.
4. Tap the Connect button.
Before setting up GPRS, obtain the access
point (AP) from your SIM card’s network
service provider.
To avoid damage to the SIM card, insert the
SIM card before you turn the power on and
remove the SIM card after you turn the power
off.
Note
2
3
4
Note