AdvanTech Flooring and Sheathing Product Brochure
References: 1. Builder Magazine’s 2015 Brand Use Study. 2. AdvanTech ooring is the only wood structural panel substantiated by third party evaluation services for published design values for strength, stiffness
and fastener holding power above PS-2 minimums. Please see ESR-1785 for AdvanTech ooring published design values. 3. ESR-1785 is an Evaluation Services Report (ESR) issued by the International Code Council
Evaluation Service. Evaluation reports from ICC Evaluation Service are frequently used by code of cials to verify that new and innovative building products comply with code requirements. 4. Limitations and restrictions
apply. Visit AdvanTechPerforms.com for details. 5. ICC ES Evaluation Service Report ESR-1785. 6. Based on the design values published in ICC-ES Evaluation Service Report, ESR-1785 and the 2012 APA Panel Design
Speci cation, Form No. D510C. 7. Allowable nail withdrawal values were calculated in accordance with the 2012 National Design Speci cation for Wood Construction using a 0.131 inch diameter nail for ooring and
0.148 inch diameter nail for roof and wall sheathing calculations. American Wood Council ASD/LRFD 8. 2012 APA Panel Design Speci cation, Form No. D510C 9. See AdvanTech Flooring Product Data Sheet on
AdvanTechPerforms.com for available thicknesses stamped as Structural 1.
Visit AdvanTechPerforms.com to learn why
AdvanTech
®
flooring is the Flat Out Best
™
for
a quiet, stiff floor. 1.800.933.9220
© 2015 Huber Engineered Woods LLC. AdvanTech is a registered trademark and FLAT OUT BEST is a trademark of Huber Engineered Woods LLC.
Huber is a registered trademark of J.M. Huber Corporation. This product’s Environmental Product Declaration (EPD) has been certi ed by UL Environment. HUB 3074 REV 8/15
4
4
VOTED #1 IN QUALITY BY BUILDERS LIKE YOU!
1
Give AdvanTech
®
panels a try today!
Visit AdvanTechPerforms.com for current rebate offers.
#1
#
1
since 2002
#
1
#1 IN QUALITY
WALL SHEATHING
#1 IN QUALITY OSB
year 2015
1