User`s manual

IPPC-9120G/9150G Users Manual 30
3.1.4 Locating connectors
Figure 3.2: Connectors on IPPC-9120G/9150G motherboard
3.2 CPU Installation
You can install an Intel® Pentium® III or Celeron™ CPU without setting
any frequency ratio or voltage.
Warning! To avoid damaging the computer, always turn off
the power supply before setting “Clear CMOS”.
Set the jumper back to “Normal operation” before
turning on the power supply.
CN3: Flat panel display connecto
r
CN2: Flat panel display connecto
r
CN27: Touchscreen interface &
PS/2 connector
CN18: CD-ROM connector
CN16: EIDE hard disk
drive connector
J8: Front panel
control connector
Slot1: PCI/ISA expansion
slot
J1: AT power connector
FAN2: System fan power
connector
J9: IR connector
CN10: Floppy drive
connector
FAN1: CPU f an
power connector
J6: Internal speaker
connector
J4: Inverter power connector