User`s manual

 Adaptec I2O RAID Host Adapter Driver for

Windows 2000

Driver setup during Windows 2000 Installation

1. CD-ROM Install: Boot from the CD-ROM and press

<F6> while the message “Setup is inspecting your

computer’s configuration…”.

2. When the “Welcome to Setup” window is generated,

press “Enter”.

3. In the “Setup Method” dialog box, press “Enter” to

confirm “Express Setup”.

4. Press “S” to add a SCSI adapter.

5. Specify “a:\”, insert the “Adaptec I2O RAID Host

Adapters for Windows 2000” diskette into Drive A: and

press "ENTER".

6. Select the “Adaptec I2O RAID Host Adapters for

Windows 2000” and click “OK”.

Note: for CD-ROM installations, you must also specify

the driver for your CD-ROM adapter.

Follow the normal Windows 2000 setup installation

procedure. Please check other drivers in Driver Bank.

RS-200-RT User’s Manual