User`s manual

automatically assigns them.
PCI/VGA Palette Snoop [Disabled/Enabled]: Some
display cards that are nonstandard VGA, such as graphics
accelerators or MPEG Video Cards, may not show colors
properly. The setting Enabled should correct this problem.
Otherwise, leave this on the setup default setting of
Disabled. Recommend set Disabled.
State After Power Failure: The field let you determine
which state your PC with a power failure returns to after
power source supplies again. If set to Off, the PC will not
boot after power supplies again. If set to On, the PC will
boot after power source supplies again.
RS-200-RT User’s Manual
68