User`s manual

3.2.4 PnP/ PCI Configurations

PnP OS Installed [Yes/No]: Select “Ye s” if you are using a

Plug and Play enabled operating system. Select “No” if you

need the BIOS to configure non-boot devices.

Reset Configuration Data [Disabled/Enabled]: Default is

Disabled. Select Enabled to reset Extended System

Configuration Data (ESCD) when you exit Setup if you

have installed a new add-on and the system reconfiguration

has caused such a serious conflict that the OS cannot boot.

Resources Controlled by [Auto/Manual]: BIOS can

automatically configure all the boot and plug & play

compatible devices. If you choose Auto, you cannot select

IRQ, DMA and memory base address fields, since BIOS

RS-200-RT User’s Manual