User`s manual

2.10 Adding Disk Drives

The RS-100/200-RT has preinstalled three/six hard

disk drive bays, one slim-type CD-ROM or DVD-ROM

(master mode only) and one slim-type floppy disk drive.

The RS-100/200-RT provides one SCA-2 backplane and can

support three/six hot-swap hard disk drives.

Please notice that if the hard disk drives used in the

RS-100/200-RT shall be 3.5”, 1” height SCSI hard disk

drives with 80-pin SCA-2 connectors.

In order to install the hard disk drives in the chassis,

please follow the procedures below.

Unfasten the dummy HDD tray from the hard disk rack. Put

the hard disk drive in the hard rack and fasten it with

screws.

RS-200-RT User’s Manual