User`s manual

 J4-RTC CMOS Jumper setting
Jumper
F
unction
1-2 Closed
R
TC CMOS Active
2-3 Closed CMOS Clear
 JFREQ1
Ratio Pin 1-2 Pin 3-4 Pin 5-6 Pin 7-8 Ratio x 133M
4 OFF OFF OFF OFF 533Mhz
7.5 OFF OFF ON OFF 1Ghz
8 ON ON OFF OFF 1.066Ghz
8.5 ON OFF ON ON 1.13Ghz
9 OFF OFF ON ON 1.2Ghz
9.5 OFF ON ON ON 1.26Ghz
10 OFF ON OFF OFF 1.33Ghz
10.5 ON ON OFF ON 1.4Ghz
11 ON OFF OFF OFF 1.46Ghz
11.5 OFF ON OFF ON 1.53Ghz
12 ON OFF OFF ON 1.6Ghz
Note1: Case Fan must connect to CN27--FAN(2B0),
CN28--FAN(2B1),
CN29--FAN(2B2),CN30--FAN(2B3).
Note2: Case Fan must connect to CN27--FAN(2B0),
CN29--FAN(2B2),CN30--FAN(2B3).
Note3: One CPU must work on U35, U36 add a CPU
terminator board.
Note4: CN16---Redundant power fail.
Note5: CN31---Thermal sensor .
Note6: CN32---Case Open sensor.
Note7: CN25---connects to LED board.
RS-200-RT User’s Manual
34