Technical information

2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
3/333/33
Managed switches, 8 ports, copper twisted pair and fibre optic
7 x
10/100BASE-TX ports
6 x
10/100BASE-TX ports
7 x
10/100BASE-TX ports
6 x
10/100BASE-T ports
RJ45
Shielded twisted pair, category CAT 5E
100 m
1 x 100BASE-FX port 2 x 100BASE-FX ports 1 x 100BASE-FX port 2 x 100BASE-FX ports
Duplex SC
Multimode optical fibre Single mode optical fibre
5000 m (1) –
4000 m (1) –
– 32,500 m (2)
8 dB –
11 dB –
– 16 dB
FDR, SMTP V3, SNTP client, multicast filtering for optimization of the Global Data protocol, configuration via Web access
VLAN, IGMP Snooping, RSTP (Rapid Scanning Tree Protocol), priority port, data stream control, secure port
Unlimited
50 max.
Redundant power supplies, redundant single ring, ring coupling
9.6...60 V c/18…30 V a, safety extra low voltage (SELV)
6.5
W 7.3 W 6.5 W 7.3 W
6-way
0…+ 60°C
10… 90% non-condensing
IP 20
75 x 131 x 111 mm
On symmetrical DIN rail, 35 mm wide
0.410 kg
IEC/EN 61
131-2, IEC 61850-3, UL 508, UL 1604 class 1 division 2, CSA 22.2 No. 214 (cUL), CSA 22.2 No. 213 class 1 division 2 (cUL), e, GL, C-Tick
Power supply status, alarm relay status, active redundancy, redundancy management, fibre port status and fibre port activity
Power supply fault, Ethernet network fault or communication port fault (volt-free contact 1 A max. at 24 V c)
TCS ESM 083F1CU0 TCS ESM 083F2CU0 TCS ESM 083F1CS0 TCS ESM 083F2CS0
3/46
(1) Length dependent on the attenuation analysis and attenuation of the optical fibre (typical value: 2000 m)
(2) Length dependent on the attenuation analysis and attenuation of the optical fibre (typical value: 15,000 m)