Technical information

2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2/192/19
Description
Modicon M340 automation
platform
0
Analog I/O modules
Description
BMX AMp/ART analog I/O modules are standard format (1 slot). They have a case,
which ensures IP 20 protection of the electronics, and are locked into position by a
captive screw.
I/O modules connected via 20 or 28-way removable terminal block
BMX AMp analog I/O modules feature the following:
A rigid body providing support and protection for the electronic card
A module reference marking (a label is also visible on the right-hand side of the
module)
A module and channel status display block
A connector taking the 20 or 28-way removable screw or spring-type terminal
block for directly connecting the sensors or preactuators to the module.
To be ordered separately:
A BMX FTB 20p0 or BMX FTB 2820 20 or 28-way removable terminal block
(referencing label supplied with each I/O module) or pre-wired cables with:
A 20-way terminal block at one end and flying leads at the other
(BMX FTW p01S)
A 28-way terminal block at one end and flying leads at the other
(BMX FTW p08S)
A 20 or 28-way terminal block and a 25-way SUB-D connector (BMX FCA pp0
or BMX FTA pp0), for connection to Modicon Telefast ABE 7 sub-bases (see
page 2/23).
1
2
3
4
5
-
-
-
I/O modules connected via 40-way connector
BMX ART analog input modules have the following on the front panel:
A rigid body providing support and protection for the electronic card
A module reference marking (a label is also visible on the right-hand side of the
module)
A module and channel status display block
One (or two) 40-way connector(s) for connecting the sensors
To be ordered separately:
Pre-wired cables with:
A 40-way connector at one end and flying leads at the other BMX FCW p01S
A 40-way connector and a 25-way SUB-D connector (BMX FCA pp2) for
direct connection to the Modicon Telefast ABE 7 sub-bases (see page 2/23)
Must be ordered separately:
A shielding connection kit to protect against electrostatic discharge, consisting of
a metal bar and two sub-bases for mounting on the rack supporting the analog
modules
A set of STB XSP 3020 clamping rings for the shielding braids of analog signal
cables
1
2
3
4
5
-
-
b
b
1
3
4
2
5
Processors:
page 1/2
Communication:
page 3/2
Software:
page 4/2
Ruggedized Modicon M340 modules:
page 6/2
Module for connection via 20 or 28-way
removable terminal block
1
3
4
2
5
Module for connection for 40-way connector