Technical information

2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2/92/9
B
B
A
A
Preassembled cordset with
20-way removable terminal block at one end and
flying leads at the other
Preassembled cordset with
40-way connector and two ends with flying leads
Example of connection to the TeSys Quickfit installation help
system
Connections
Modicon M340 automation
platform
0
Discrete I/O modules
Connecting modules with removable terminal blocks
There are three types of 20-way removable terminal block:
Screw clamp terminal block
Cage clamp terminal block
Spring-type terminal block
Each removable terminal block can take:
Bare wires
Wires equipped with DZ5 CE cable ends
A : One version of the removable terminal block is equipped with 3, 5 or 10 m cordsets
with colour-coded flying leads (BMX FTWpp1). Use limited to voltages of y 48 V.
b
b
b
b
b
Cage clamp terminal blocks
The capacity of each terminal is:
Minimum: One 0.34 mm
2
wire (AWG 22)
Maximum: One 1 mm
2
wire (AWG 18)
BMX FTB 2000 cage clamp connectors are equipped with captive screws
(maximum tightening torque 0.5 N.m).
b
b
Screw clamp terminal blocks
The capacity of each terminal is:
Minimum: One or two 0.34 mm
2
wires (AWG 22)
Maximum: Two 1.5 mm
2
wires (AWG 15)
BMX FTB 2010 screw clamp connectors are equipped with captive screws
(maximum tightening torque 0.5 N.m).
b
b
Spring terminals
The capacity of each terminal in the BMX FTB 2020 spring-type terminal blocks is:
Minimum: One 0.34 mm
2
wire (AWG 22)
Maximum: One 1 mm
2
wire (AWG 18)
b
b
Connecting modules with 40-way connectors
Preassembled cordsets with 40-way connector at one end and flying leads at
the other
B : Preassembled cordsets can be used for easy direct wire-to-wire connection
between the I/O of modules with 40-way connectors
1 and the sensors, preactuators
or intermediate terminal blocks.
These preassembled cordsets comprise:
At one end, a 40-way connector
2 with either of the following:
One sheath containing 20 wires with a cross-section of 0.34 mm
2
(AWG 22)
(BMX FCW pp1)
Two sheaths
3 , each containing 20 wires with a cross-section of 0.34 mm
2
(AWG 22) (BMX FCW pp3)
At the other end, colour-coded flying leads
4 conforming to standard DIN 47100.
b
-
-
b
Preassembled cordsets with 40-way connector and HE 10 connector(s)
C : Two types of cordset can be used for connecting the I/O of modules 1 with
40-way connectors to Modicon Telefast ABE 7 rapid wiring connection and
adaptation interfaces
, (see page 5/8).
These preassembled cordsets comprise:
At one end, a 40-way connector
2 with either of the following:
One sheath containing 20 wires (BMX FCC pp1)
Two sheaths
3 each containing 20 wires (BMX FCC pp3)
At the other end, one or two HE 10 connectors
5.
b
-
-
b
Connection to TeSys Quickfit system
D : 1 BMX DDI 3202K/6402K input modules, BMX DDO 3202K/6402K output
modules and BMX DDM 3202K mixed I/O modules with 40-way connectors are
designed, amongst other things, for use in conjunction with the TeSys Quickfit
mounting system via theLU9 G02 splitter module
6 (for 8 motor starters).
The splitter modules are easily connected using
7 BMX FCC pp1/pp3 preassembled
cordsets.
B
B
A
A
Preassembled cordset with
40-way connectors and HE10 connectors for
Modicon T
elefast ABE 7 system
B
B
A
A
Preassembled cordset with
40-way connectors and HE10 connectors for
Modicon T
elefast ABE 7 system
A
B
C
D
1
2
5
3
1
2
3
4
1
7
6
Processors:
page 1/2
Communication:
page 3/2
Software:
page 4/2
Ruggedized Modicon M340 modules:
page 6/2