Technical information

2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2/52/5
16 or 32-channel mixed I/O module
Connection via cage clamp, screw clamp or spring-type removable block terminal Connection via 40-way connector with
preassembled cordsets
c c and a (outputs only) c
Inputs:
24 V
Solid-state outputs: 24 V
Inputs: 24 V c
Relay outputs: 24 V c or 24…240 V a
Inputs: 24
V
Solid-state outputs: 24 V
3.5 mA 3.5 mA 2.5 mA
0.5
A 2 A (c or a) 0.1 A
8 isolated inputs and 1 common,
8 isolated outputs and 1 common
16 isolated inputs and 1 common,
16 isolated outputs and 1 common
Via BMX
FTB 2000/2010/2020
20-way cage clamp, screw clamp or spring-type removable terminal block
Via one 40-way connector
Type 3
Positive (sink) – Positive (sink)
Current sink
2-wire c
, 3-wire c PNP any type
19…30
V
Use one 0.5 A fast-blow fuse per group of channels
Configurable output fallback, continuous monitoring of output control and resetting of outputs in case of internal fault
Yes
Protected Not protected Protected
Positive – Positive
19…30
V 19
...30 V c
24...240 V a
19…30 V
Use a 2
A fast-blow fuse Use a 12 A fast-blow fuse Use a 2 A fast-blow fuse
3.7 W 3.1 W 4 W
0…60°C
– LU9 G02 splitter boxes (8 motor starters) and
BMX FCC pp1/pp3 preassembled cordsets.
See pages
2/9 and 2/13.
– Depending on model, 8 or 16-channel passive
sub-bases, with or without LED, with common or
2 terminals
per channel. See pages 5/2 and 5/8.
– Depending on model, active sub-bases with solid
state or electromagnetic relays (fixed or removable)
16 channels, with common or 2 terminals per
channel (screw or
spring-type connection).
See pages 5/2 and 5/8.
BMX DDM 16022 BMX DDM 16025 BMX DDM 3202K
2/13