Technical information

2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2/42/4
Applications 32 or 64-channel high-density input modules
Connection via 40-way connectors with preassembled cordsets
Type c
Voltage
24 V
Current per channel Inputs 2.5 mA 1 mA
Outputs – –
Modularity
(Number of channels and
commons)
32 isolated inputs and
2 commons
64 isolated inputs and
4 commons
Connection Via one 40-way connector Via two 40-way connectors
Isolated inputs IEC/EN 61131-2 conformity Type 3 Non-IEC
Logic Positive (sink)
Type of input Current sink
Sensor compatibility
IEC/EN 60947-5-2
2-wire c, 3-wire c
PNP any type –
Sensor power supply
(ripple included)
19…30 V
Protection of inputs Use one 0.5 A fast-blow fuse per group of channels
Isolated outputs Fallback –
IEC/EN 61131-2 conformity –
Protection –
Logic –
Preactuator power supply
(ripple included)
–
Output fuse protection –
Maximum dissipated power 3.9 W 4.3 W
Operating temperature 0…60°C
Compatibility with
installation help system
TeSys Quickfit
LU9 G02 splitter boxes (8 motor starters) and BMX FCC pp1/pp3 preassembled cordsets.
See pages 2/9 and 2/13.
Compatibility with pre-wired
system
Modicon Telefast ABE7
Passive connection sub-
bases
Depending on model, 8 or 16-channel passive sub-bases, with or without LED, with common or
2 terminals per channel.
See pages 5/2 and 5/8.
Adaptor sub-bases with
relays
Depending on model, active sub-bases with solid state or electromagnetic relays (fixed or
removable), 16 channels, with common or 2 terminals per channel (screw or spring-type
connection).
See pages 5/2 and 5/8.
References
BMX DDI 3202K BMX DDI 6402K
Page 2/12
Selection guide (continued)
Modicon M340 automation
platform
0
Discrete I/O modules
Input modules and mixed I/O modules