User`s manual

RS-400-SF User’s Manual

3.2.6 PnP/ PCI Configurations

Reset Configuration Data [Disabled/Enabled]: Default is

“Disabled”. Select “Enabled” to reset Extended System

Configuration Data (ESCD) when you exit Setup if you

have installed a new add-on and the system reconfiguration

has caused such a serious conflict that the OS cannot boot.

Resources Controlled by [Auto/Manual]: BIOS can

automatically configure all the boot and plug & play

compatible devices. If you choose “Auto”, you cannot select

IRQ, DMA and memory base address fields, since BIOS

automatically assigns them.