User`s manual

RS-400-SF User’s Manual
27
2.7 Memory Installation Procedures
To install DDR DIMMs, first make sure the two handles of
the DDR DIMM socket are in the "open" position. i.e. The
handles lean outward. Slowly slide the DDR DIMM module
along the plastic guides on both ends of the socket. Then
press the DDR DIMM module right down into the socket,
until you hear a click. This is when the two handles have
automatically locked the memory module into the correct
position of the DDR DIMM socket. To remove the memory
module, just push both handles outward, and the memory
module will be ejected by the mechanism in the socket.
DDR DIMM (184pin)