User Manual

USB over IP (Electronic Team)
2.2 Configuration
2.2.1 Global
Configuration of this user module can be done on Global page, under Configuration menu
section. All configuration items for Global configuration page are described in the table below.
Figure 4: Global Configuration
Item Description
Enable USB over IP (Electronic
Team) service
Enabled, logging functionality of the module is turned on.
TCP Port Enter the port number.
USB Device To Share Enter the name of available USB device (see in
Overview item in menu).
Nickname You can use a nickname for the device.
Encrypt Select Yes to enable the encryption.
Authorization Select Yes to enable authorization.
Password If you used Yes in the last line, enter the password re-
quired to connect to the USB device.
Remote Disconnect Select the checkbox if ? connected device can be dis-
connected by another local user
Compress Select Yes to enable compression.
Compress Type Select the compression variant (Best or Fast).
Log level Select the level of information that will be entered into
the System Log.
Table 1: Configuration Example Items Description
4