User Manual PPC-L62T Intel Atom Processor-Based Panel PC with 6.
Copyright The documentation and the software included with this product are copyrighted 2012 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure.
Safety Instructions 1. 2. 3. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any DC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components.
PPC-L62T User Manual vi
Contents Chapter 1 General Information ............................1 1.1 1.2 Introduction ............................................................................................... 2 Specifications ............................................................................................ 2 1.2.1 General Specifications .................................................................. 2 1.2.2 Standard PC Functions................................................................. 2 1.2.
4.4 4.5 Chapter HDD.......................................................................... 17 Figure 4.4 Assembly HDD Module to Rear Cover..................... 18 Figure 4.5 HDD Module is Mounted to the Machine.................. 18 Installing the DDR3 SDRAM Memory Module ........................................ 19 Figure 4.6 Placing the memory card on the board end ............. 19 Installing Wireless Network Card ............................................................ 20 Figure 4.
Chapter 1 1 General Information This chapter gives background information on the PPC-L62T.
1.1 Introduction Advantech PPC-L62T is an Intel Atom processor based Panel PC with a bright 6.5" LCD display. The powerful Atom CPU and Intel ICH8M chipsets bring the most dynamic applications to life without sacrifices to any industrial reliability. The Internal CFast card interface can serve as an alternate HDD solution for OS booting and the Mini PCIe interface can be used a wireless LAN card to extend device mobility.
Chapter 1 1.2.6 Touchscreen Specifications (Optional) Table 1.1: Touchscreen Specifications Type Analog Resistive 640 x 480 Light Transmission 81% Controller COM/USB Software Driver Windows Durability (touches in a life- time) 36 million 1.2.7 Optional Modules CPU: Supports Intel Atom processor, single-core N455 1.66 GHz Memory: Supports up to 2 GB DDR3 SO-DIMMs [204-pin SODIMM socket] HDD: Supports 2.5" SATA HDD Touchscreen: Analog resistive CFast: 1 CFast slot 1.2.
1.3 Dimensions Figure 1.
Chapter 2 2 System Setup This chapter gives system setup information for the PPC-L62T.
2.1 A Quick Tour of the Panel PC Before starting to set up the panel PC, take a moment to become familiar with the locations and purposes of controls, drives, connectors and ports, which are illustrated in the figures below. When placed upright on the desktop, the front panel of the panel PC appears as shown in Figure 2.1. Figure 2.1 Front Panel of PPC-L62T When viewed from the left side of the panel PC, the CFast, holes for panel mount are visible, as shown in Figure 2.2.
PPC-L62T-R80-AXE $ % & ' ( ) * A: DC Inlet C: Line Out E: 10/100 /1000 Mbps Ethernet x 2 G: RS-232/422/485 x 1 B: RS-232x 1 D: USB 2.0 x 2 F: USB 2.0 x 2 PPC-L62T-R80-BXE $ % & ' ( ) * Figure 2.4 I/O Peripheral Connectors Panel of DC Input Model A: DC Inlet C: Line Out E: 10/100/1000 Mbps Ethernet x 1 G: RS-232/422/485 x 1 B: RS-232 x 1 D: USB 2.0 x 2 F: RS-232 x 1 7 PPC-L62T User Manual System Setup Figure 2.
VESA standard: 75 x 75 mm mounting size. Figure 2.5 Rear View of the Panel PC Caution! Use recommended mounting apparatus to avoid risk of injury. 2.2 Preparing for First-time Use Before commencing set up of the panel PC system, the following items should be available: Keyboard Mouse (for system software installation) 2.3 Installation Procedures 2.3.1 Connecting the Power Cord The panel PC can be powered through an DC outlet (15 ~ 24 V).
Switch on the power switch, which is located inside the back cover. 2.4 Running the BIOS Setup Program 2.5 Installing System Software Recent releases of operating systems from major vendors include setup programs which load automatically and guide you through hard disk formatting and operating system installation. The guidelines below will help determine the steps necessary to install the operating system onto the panel PC hard drive.
PPC-L62T User Manual 10
Chapter 3 3 Using the Panel PC This chapter explains onboard devices and peripheral I/O ports available on the PPC-L62T.
3.1 Introduction This chapter describes basic features and procedures for using the panel PC. Topics covered include: I/O ports and the touchscreen. This product is a high performance panel PC, please keep upright. 3.2 Serial COM Ports There are four serial COM ports on the side. It is simple to attach a serial device to the panel PC, such as an external modem or mouse. Follow these instructions: 1. Be sure the panel PC and any other peripheral devices that are connected to the panel PC are turned off. 2.
An external USB device may be connected to the system through the USB ports located on the rear side and left side of the system unit. 1. Connect the external device to the system. 2. The USB ports support hot plug-in connections. Install the device driver before using the device. The audio interface includes one jack to line out. Their functions are: Line out: Output audio to external devices such as speakers or earphones. 1. Connect the audio device to the system. 2.
PPC-L62T User Manual 14
Chapter 4 4 Hardware Installation This chapter gives instructions for installing hardware devices on the PPC-L62T.
4.1 Introduction The panel PC consists of a PC-based computer that is housed in a metal shielding case with a rear cover on the rear and bottom. All the computer devices, like the CPU, SDRAM and power supply are all readily accessible after removing the rear panel or the HDD cover. Any maintenance or hardware upgrades can be easily completed after removing the rear panel and/or HDD cover. Warning! Do not remove the rear cover until verifying that no power is flow-ing within the panel PC.
One serial ATA (SATA) hard disk drive may be attached to the panel PC. The following instructions are for installing the HDD: 1. Remove the six screws on rear cover first. (See Figure 4.2) 2. Place SATA HDD Cable & HDD rear cover connected to the HDD. (See Figure 4.3) Figure 4.3 SATA HDD Cable & HDD Rear Cover Connected to the HDD 17 PPC-L62T User Manual Hardware Installation Figure 4.2 Unfastening the Rear Cover Chapter 4 4.3 Installing the 2.
3. The HDD module is mounted to the cover& the machine. (See Figure 4.4) Figure 4.4 Assembly HDD Module to Rear Cover 4. Tighten rear cover 6 screws, the HDD module is mounted to the machine. (See Figure 4.5) Figure 4.
The panel PC system provides one 204-pin SODIMM sockets and it is able to install 2 GB of DDR3 SDRAM memory. The following instructions are for installing the DDR3 SDRAM Memory: 1. Placing the memory card on the board end corresponding position. (See Figure 4.6) Chapter 4 4.4 Installing the DDR3 SDRAM Memory Module Hardware Installation Figure 4.
4.5 Installing Wireless Network Card The following instructions are for installing the wireless network card: 1. Remove the rubber plug (out of box on the top side). (See Figure 4.7) Figure 4.7 Out of box on the left side of the rubber plug 2. Install the wireless LAN card and antenna. (See Figure 4.8) Figure 4.
Chapter 5 5 Jumpers and Connectors This chapter gives information on setting jumpers and using the connectors on the PPC-L62T motherboard.
5.1 Jumpers and Connectors This chapter supplies more detailed information about the internal jumper settings and an outline of the I/O ports available on the PPC-L62T. 5.1.1 Setting Jumpers The Panel PC can be configured to match the needs of each application by setting jumpers. A jumper is the simplest kind of electrical switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover), which slides over the pins to close the circuit and connect them.
The motherboard of the panel PC has a number of jumpers that help configure the system. It also has LED indicator lights that display the system operation status. The table below lists the function of each jumper and LED. The motherboard of the PPC-L62T has a number of jumpers that allow you to configure your system to suit your applications. Chapter 5 5.1.2 Jumpers Table 5.1: Jumpers List CMOS CLEAR & AT/ATX Select CN16 Ring and Power for COM1/ pin 9 Jumpers and Connectors JP1 Table 5.
5.1.3 Jumper and Connector Locations CN1 CN3 JP1 CN4 CN5 CN7 CN8 CN6 CN9 CN12 CN13 CN11 CN16 CN14 CN15 CN17 CN24 CN25 CN20 CN19/18 CN21 CN22 CN26 CN23 CN27 Figure 5.
Onboard connectors link the panel PC to external devices such as hard disk drives. The table below lists the function of each of connectors. Table 5.
Table 5.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
XXX-XXXX User Manual 28
