User manual

21 PPC-L61T User Manual

Chapter 4 Jumper Settings and Connectors

4.2 Jumper setting on Mother-Board

4.2.1 CMOS Clear for External RTC (JP1)

4.2.2 AT/ATX power Setting Power feature setting (J1)

The default setting for PPC-L61T is ATX Mode, client can easy to adjust Power Mode

to AT by jumper setting. Described as below:

Warning! To avoid damaging the computer, always turn off the power supply

before setting "Clear CMOS". Set the jumper back to "Normal operation"

before turning on the power supply.

Table 4.3: Clear CMOS / External RTC (JP1)

Normal Operation (Default) Clear CMOS

Table 4.4: AT/ATX Power setting (J1)

ATX Power Model (Default) AT Power Mode