User Manual PPC-L128T Intel® AtomTM N270 Processorbased Fanless Panel PC with 12.
Copyright The documentation and the software included with this product are copyrighted 2009by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Declaration of Conformity FCC Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Packing List Before you begin installing your card, please make sure that the following materials have been shipped: PPC-L128T series panel PC User manual Accessories for PPC-L128T – Y-shaped adapter for PS/2 mouse and keyboard – Warranty card – DC plug-in housing (female) is connected on the AC/DC power adapter – Driver DVD-RW disc – Mounting kits and packet of screws If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Safety Instructions 1. 2. 3. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
PPC-L128T User Manual vi
Contents Chapter 1 General Information ............................1 1.1 1.2 Introduction ............................................................................................... 2 General Specifications .............................................................................. 2 1.2.1 General ......................................................................................... 2 1.2.2 Standard PC functions .................................................................. 2 1.2.
4.2 4.3 board ........................................................................ 20 CMOS Clear for External RTC (CN13(2-3))............................................ 20 Table 4.2: CMOS clear (CN13) ................................................. 20 4.2.1 COM1/COM2/COM3 pin 9 output setting (CN20&CN21) ........... 21 Table 4.3: COM1/ COM2 pin 9 output setting (CN20).............. 21 Table 4.4: COM3 pin 9 output setting (CN21) .......................... 21 VGA Interface ...........................
Chapter 1 1 General Information This chapter gives background information on the PPC-L128T panel PC.
1.1 Introduction The PPC-L128T panel PC is an Intel low-power Intel® AtomTM N270 processor computer that is designed to serve as a human machine interface (HMI) and as a multimedia computer. It is a PC-based system with 12.1" color TFT LCD display, on-board PCIe Ethernet controller, multi-COM port interfaces and an audio controller.
Chipset: Integrated in Intel 945GSE Frame buffer: Supports 128MB frame buffer with system memory Interface: VGA/ LCD interface, support for 18-bit TFT Display mode: CRT Modes: 2048 x 1536 @ 32bpp (60Hz); LCD/Simultaneous Modes: 1024 x768 @ 16bpp (60 Hz) 1.2.4 Audio function Chipset: Intel ICH7M South Bridge Audio controller: ALC888 HD Audio Ver 2.
1.2.7 Optional modules Memory: One 200-pin SO-DIMM socket, accepting up to 2 GB DDR2 400/533 DVD-RW Module: Slim type DVD-RW Module 989KL128T00E Combo Module: Slim type Combo Module 989KL128T01E Wireless LAN module: 989KL128T02E (Build in IEEE 802.11b/g AzureWave AW-NE768 Mi MINI PCIe card) Adaptor: PS-DC19-L157E HDD: 2.5" SATA HDD Operating System: Windows XP,Vista Touchscreen: Analog resistive(PPC-L128T-R80-XE) Battery pack: Rechargable Li-ion 3S2P 11.1 V 4400 mAh(1760000837) 1.2.
Chapter 1 1.4 Dimensions General Information Unit: mm [inch] Figure 1.
PPC-L128T User Manual 6
Chapter 2 2 System Setup This chapter details system setup on the PPC-L128T panel PC.
2.1 A Quick Tour of the Panel PC Before you start to set up the panel PC, take a moment to become familiar with the locations and purposes of the controls, drives, connectors and ports, which are illustrated in the figures below. When you place the panel PC upright on the desktop, its front panel appears as shown in Figure 2.1. Figure 2.1 Front view of PPC-L128T panel PC When you turn the panel PC around and look at its rear cover, you will find the I/O section as shown in Fig. 2.2.
CompactFlash socket CFC eject button Chapter 2 Compact DVD-RW drive DVD-RW activity light DVD-RW eject button Figure 2.3 Side view of the panel PC Door Cover Battery Figure 2.4 Bottom view of the panel PC 2.2 Installation Procedures 2.2.1 Connecting the power cord The panel PC can be powered by a DC electrical outlet or the battery. Be sure to always handle the power cords by holding the plug ends only.
2.2.3 Switching on the power When you look at the rear side of the panel PC, you will see the power switch as shown in Figure 2.2. Power cord AC/DC Power adapter DC inlet Figure 2.5 Connect the power cord to the DC inlet 2.3 Running the BIOS Setup Program Your panel PC is likely to have been properly set up and configured by your dealer prior to delivery.
Recent releases of operating systems from major vendors include setup programs which load automatically and guide you through hard disk preparation and operating system installation. The guidelines below will help you determine the steps necessary to install your operating system on the panel PC hard drive. Note! Some distributors and system integrators may have already preinstalled system software prior to shipment of your panel PC. 2.4.
PPC-L128T User Manual 12
Chapter 3 3 Hardware Installation and Upgrading This chapter details installing the PPC- L128T panel PC hardware. Sections include: Overview of Hardware Installation and Upgrading Installing the 2.
3.1 Introduction The panel PC consists of a PC-based computer that is housed in a plastic rear panel and a metal shielding case. You can install a HDD, DRAM, and battery pack by removing the rear panel and shielding case. Any maintenance or hardware upgrades can be easily completed after remov- ing the rear panel and shielding case. If you are a systems integrator and need to know how to completely dis- assemble the panel PC, you can find more useful information in Appendix C.
1. 2. 3. Pull up the battery door cover on the right bottom of PPC-L128T. Put the battery pack in, and then connect the battery cable to battery connector in the PPC-L128T. Make sure the red wire corresponds to Pin 1 on the connector. Close the battery door cover. Red color (pin1) Battery pack Battery cable Figure 3.2 Installing the battery pack 15 PPC-L128T User Manual Hardware Installation and Upgrading Battery door cover Chapter 3 3.
PPC-L128T User Manual 16
Chapter 4 4 Jumper Settings and Connectors This chapter tells how to set up the panel PC hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installation procedures.
4.1 Jumpers and Connectors 4.1.1 Setting jumpers You can configure your panel PC to match the needs of your application by setting jumpers. A jumper is the simplest kind of electrical switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper, you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
The motherboard of the PPC-L128T has a number of jumpers and connectors that allow you to configure your system to suit your applications. The table below lists the function of each of the board’s jumpers. Table 4.1: Jumpers and Connector functions LVDS connector CN3 Inverter power connector CN4 CF Slot ,TYPEII CN5 SATA HDD signal connector (2.5" HDD) CN6 SATA HDD power connector (2.
4.1.3 Locating jumpers and connectors Figure 4.1 Jumpers and Connectors on the PPC-L128T motherboard 4.2 CMOS Clear for External RTC (CN13(2-3)) Warning! To avoid damaging the computer, always turn off the power supply before setting "Clear CMOS". Set the jumper back to "Normal operation" before turning on the power supply. This jumper is used to erase CMOS data and reset system BIOS informa- tion. The procedure for clearing CMOS is: 1. Turn off system. 2. Short pin 2 and pin 3. 3.
Chapter 4 4.2.1 COM1/COM2/COM3 pin 9 output setting (CN20&CN21) Table 4.3: COM1/ COM2 pin 9 output setting (CN20) CN20 Default Ring function 3 5 7 9 2 4 6 8 10 1 3 5 7 9 2 4 6 8 10 Jumper Settings and Connectors 1 * +5V output * +12V output Note! 1 3 5 7 9 2 4 6 8 10 Pins 1, 3, 5, 7 and 9 are dedicated to COM1. Pins 2, 4, 6, 8 and 10 are dedicated to COM2. Table 4.
PPC-L128T User Manual 22
Appendix A A I/O Pin Assignments
A.1 Keyboard and PS/2 Mouse Connector (CN27) Table A.1: Keyboard and mouse connector (CN27) Pin Signal 1 KB_DATA 2 MS-DATA 3 GND 4 +5 V 5 KB_CLK 6 MS-CLK A.2 USB port (CN19) Table A.2: USB port (CN19) Pin Signal 1 +V5_USB 3 DATA- 5 DATA+ 7 GND 9 GND 2 +V5_USB 4 DATA- 6 DATA+ 8 GND 10 GND A.3 COM1 RS-232 serial port (CN37) Table A.
Table A.4: COM2 (CN28) Pin Signal RS-232 RS-422 RS-485 1 DCD TX- DATA- 2 RX TX+ DATA+ 3 TX RX+ 4 DTR RX- 5 GND GND 6 DSR 7 RTS 8 CTS 9 RI A.5 COM3 RS-232 serial port (CN38) Table A.5: COM3 RS-232 serial port (CN38) Pin Signal Pin Signal 1 DCD# 2 RX 3 TX 4 DTR# 5 GND 6 DSR# 7 RTS# 8 CTS# 9 RI# 25 PPC-L128T User Manual Appendix A I/O Pin Assignments A.
A.6 GPIO port (CN29) Table A.6: GPIO port (CN29) 1 GPIO0 2 GPIO1 3 GPIO2 4 GPIO3 5 GND 6 GPIO4 7 GPIO5 8 GPIO6 9 GPIO7 A.7 VGA Connector (CN39) Table A.
Appendix A I/O Pin Assignments A.8 PCI Bus connector (CN18) Figure A.
Table A.
Appendix A I/O Pin Assignments A.9 PCI Express Bus connector (CN16) Table A.9: PCIExpress pin assignments Signal Pin Pin Signal GND A1 B1 +V12 +V12 A2 B2 +V12 +V12 A3 B3 +V12 GND A4 B4 GND NC A5 B5 SMB_CLK NC A6 B6 SMB_DATA NC A7 B7 GND NC A8 B8 +V3.3 +V3.3 A9 B9 NC +V3.3 A10 B10 +V3.
A.10 How to setup Teaming function on PPC-L128/ L157 A.10.1Team together Step 1. PPC-L128/L157 supports dual LAN function with each 1Gbps speed.
Step 3. Turn to Team page. Here you can create a new team or add to team. Click Create New Team. 31 PPC-L128T User Manual Appendix A I/O Pin Assignments Step 2. First, choose 1 LAN and open the properties panel. Then click on the Configure button.
Step 4. Name your team, and select the mode “Basic”. Step 5. Continue anyway. Step 6. The team has been created.
33 PPC-L128T User Manual Appendix A I/O Pin Assignments Step 7. Open the properties of another LAN, click “Add to Team” button.
Step 8. Choose the team this LAN should join in. Step 9. Now two LAN become one team with 2Gbps.
Appendix A I/O Pin Assignments A.10.2Dismiss! Step 1. Open the configure page of teaming LAN. Two team members will show inside.
Step 2. Choose the team member you want to kick out. Then click Remove Adapter button. Step 3. If you want to dismiss whole team. Click the Remove Team button and the team will be not available anymore.
Appendix A I/O Pin Assignments A.10.3TESTING Step 1. Copy a big file to your disk through teaming LAN. Step 2. Unplug one cable. And the transmission of file still alive.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
