User manual
Table Of Contents
- PPC-125
- 1 General Information
- 2 System Setup
- 3 Using the Panel PC
- 4 Hardware Installation
- 5 Jumpers and Connectors
- 5.1 Jumpers and Connectors
- 5.1.1 Setting Jumpers
- 5.1.2 Jumpers
- 5.1.3 Jumper and Connector Locations
- 5.1.4 Connectors
- Table 5.1: CN1 (USB Port 7/8)
- Table 5.2: CN2 (CPU FAN Connector)
- Table 5.3: CN3 (LVDS2 Connector)
- Table 5.4: CN4 (LVDS1 Connector)
- Table 5.5: CN5 (System FAN Connector)
- Table 5.6: CN8 (SATA HDD Power Connector)
- Table 5.7: CN9 (SATA HDD Connector)
- Table 5.8: CN10 (+V12 Power Connector)
- Table 5.9: CN12 (ATX Power Input Connector)
- Table 5.10: CN13 (USB Port 5/6)
- Table 5.11: CN15 (SPI Reflash Connector)
- Table 5.12: CN17 (SATA ODD Connector)
- Table 5.13: CN18 (SATA ODD Power Connector)
- Table 5.14: CN19 (Multi Function PCI Express by1 Connector)
- Table 5.15: CN21 (Printer Port Connector)
- Table 5.16: CN22 (LCD Light Sense Connector)
- Table 5.17: CN24 (COM4 Connector)
- Table 5.18: CN25 (Front Panel LED Connector)
- Table 5.19: CN26 (COM1 RI Function Selection Connector)
- Table 5.20: CN28 (LCD Back Light Connector)
- Table 5.21: CN29 (Power Button Connector)
- Table 5.22: CN35 (Internal Speaker Connector)
- Table 5.23: CN37 (MINIDIN PS2 Connector)
- Table 5.24: CN41 (Clear CMOS Connector (Reserved))
- Table 5.25: CN42 (COM2 RI Function Selection Connector)
- Table 5.26: CN43 (COM3 RI Function Selection Connector)
- Table 5.27: CN44 (COM4 RI Function Selection Connector)
- Table 5.28: CN45 (AT Power Solution Connector)
- 5.1.5 Jumper Settings
- 5.1 Jumpers and Connectors
- 6 Driver Installation
- A PCI Card and PCI-E Size Limits

iii PPC-125 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A complete description of the problem
– The exact wording of any error messages










