User manual

POD-6552 A2 User Manual 30
 Resume by Alarm [Disabled]
This item allows the user to enable and key in the date and time to power on the
system
3.2.7 PnP/PCI Configurations
 Reset Configuration Data [Disabled]
This item allows the user to clear any PnP configuration data stored in the
BIOS.
 Resources Controlled By [Auto (ESCD)]
– IRQ Resources
This item allows you respectively assign an interrupt type for IRQ-3, 4, 5, 7,
9, 10, 11, 12, 14, and 15.
– DMA Resources
This item allows you respectively assign an interrupt type for DMA-0, 1, 2, 3,
4, 5, 6, and 7.
 PCI VGA Palette Snoop [Disabled]
The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.
Disabled Disable this function.
Enabled Enable alarm function to power on system
Day (of month) Alarm 1-31
Time (HH:MM:SS) Alarm (0-23) : (0-59) : 0-59)
Note! The "PnP/PCI Configurations" screen sets up the IRQ and DMA (both
PnP and PCI bus assignments).