User manual

29 POD-6552 A2 User Manual
Chapter 3 BIOS Operation
 ACPI Suspend Type [S1 (POS)]
This item allows the user to select the sleep state when the computer is in sus-
pend mode.
 Power Management [Min Saving]
This item allows the user to select the system power saving mode.
– Min Saving - Minimum power management. Suspend Mode=1 hr.
– Max Saving - Maximum power management. Suspend Mode=1 min.
– User Defined - Allows the user to set each mode individually. Suspend
Mode= Disabled, or 1 min ~ 1 hr.
 Video Off Method [DPMS]
This item allows the user to determine the manner is which the monitor is
blanked.
 Video Off In Suspend [Yes]
This item allows the user to turn off the video when the system enters suspend
mode.
 Suspend Type [Stop Grant]
This item allows the user to determine the suspend type.
 Modem Use IRQ [3]
This item allows the user to determine which IRQ the MODEM can use.
 Suspend Mode [1 Hour]
This item allows the user to determine the length of time of system inactivity
after which all devices except the CPU will be shut down.
 HDD Power Down Mode [15 Min]
This item allows the user to determine the system inactivity time, when the hard
disk drive will be powered down.
 Soft-Off by PWR-BTTN [Instant-Off]
This item allows the user to define the power button functions.
 PWRON After PWR-Fail [Former-Sts]
This item allows the user to select recovery after power fail function; this func-
tion depends on the chipset.
 Power On by LAN [Enabled]
This item allows the user to enable and define how LAN wake the system up
from suspend mode.
 Power On by Ring [Enabled]
This item allows the user to enable and define how the system will resume by
activation of the modem ring.
S1(POS) Suspend mode is equivalent to a software power down;
S3(STR) The system shuts down with the exception of a refresh of electrical
current to system memory.
V/H SYNC+Blank This option will cause the system to turn off vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Initial display power management signaling.
Instant-Off Press the power button to power off instantly.
Delay 4 Sec Press and hold the power button for 4 sec to power off.