User manual

23 POD-6552 A2 User Manual
Chapter 3 BIOS Operation
 Base Memory
Displays the amount of base (or conventional) memory installed in the system.
 Extended Memory
Displays the amount of extended memory (above 1 MB in CPU°Øs memory
address map) installed in the system.
 Total Memory
Displays the total system memory size.
3.2.3 Advanced BIOS Features
 CPU Feature
This item allows the user to adjust CPU settings such as CPU ratio, VID and
Thermal, and special features like XD flag.
 CPU L1 & L2 Cache [Enabled]
This item allows user to enable CPU L1 & L2 cache.
 CPU L3 Cache [Enabled]
This item allows the user to enable/disable CPU L3 cache.
 Quick Power On Self Test [Enabled]
This field speeds up the Power-On Self Test (POST) routine by skipping re-test-
ing a second, third and fourth time. The default setting is enabled.
 First / Second / Third / Other Boot Drive
 Swap Floppy Drive [Disabled]
This item enables users to swap floppy “A” and “B” identified without change
hardware cable connection.
Floppy Select boot device priority by Floppy
Hard Disk Sets boot priority for the hard disk.
CDROM Sets boot priority for CDROM.
USB-FDD Sets boot priority for USB-FDD.
USB-ZIP Sets boot priority for USB-ZIP.
USB-CDROM Sets boot priority for USB-CDROM.
LAN Sets boot priority for LAN.
Disabled Disables this boot function.