POC-S175 Slim Point of Care Terminal with 17" TFT LCD monitor User Manual
Copyright The documentation and the software included with this product are copyrighted 2004 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (1 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
1.1 FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with this user's manual, it may cause harmful interference to radio communications.
1.2 Packing List Before installing your Point of Care Terminal, ensure that the following materials have been received: • POC-S175 series Point of Care Terminal • User's manual • Accessories for POC-S175 • Y-shaped adapter for PS/2 mouse and keyboard • Power cord (1.8 m) - USA type (UK, German types are available on request) • "Drivers and Utilities" CD-ROM disc • Mounting kits and packet of screws • External DC adapter (Manufacturer: XPiQ Inc. Model no.
• This equipment is a source of electromagnetic waves. Before use please, make sure that there are not EMI sensitive devices in its surrounding which may malfunction therefore. Warning 1. Only use the Power adapter Manufacturer: XPiQ Inc. Model no.: PCM80PS24 Input voltage: 100-240 VAC, 47-63 Hz, 1.1-0.45 A Output voltage: +24 VDC, 3.33 A max. 2. Use a 3 V @ 195 mA lithium battery (Model No. BR2032) 3. Packing: please carry the unit with both hands, handle with care 4.
8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. 9. Position the power cord so that people cannot step on it. Do not place anything over the power cord. 10. All cautions and warnings on the equipment should be noted. 11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage. 12. Never pour any liquid into an opening. This may cause fire or electrical shock. 13.
17. IMPROPER INSTALLATION OF VESA MOUNTING CAN RESULT IN SERIOUS PERSONAL INJURY! VESA mount installation should be operated by professional technician, please contact the service technician or your retail if you need this service. 18. CLASSIFICATION: • Supply class I adapter • No applied part • IPX0 • Continuous Operation • Not AP or APG category 19. Disconnect device: Appliance inlet. 20. Follow the national requirement to dispose unit. 21.
for exclusive interconnection with IEC 60601-1 certified equipment in the patient environment and IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult the technical services department or your local representative. 26. User not to contact SIP/SOPs and the patient at the same time. 27. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70dB(A). DISCLAIMER This set of instructions is given according to IEC 704-1.
POC-S175 User Manual x
Contents Chapter 1 General Information ....................................... 2 1.1 1.2 Introduction ....................................................................... 2 Specifications .................................................................... 2 1.2.1 1.2.2 1.2.3 1.2.4 1.2.5 1.2.6 1.2.7 1.2.8 1.2.9 1.3 1.4 Chapter LCD Specifications ........................................................... 5 Dimensions........................................................................
4.1.2 4.1.3 4.2 4.3 Chapter Chapter Display memory ........................................................... 20 Display types ................................................................ 20 Installation of PCI Graphic Driver .................................. 20 4.2.1 Installation for Windows 2000/XP .............................. 22 Figure 4.1:Graphic Driver Installation ......................... 22 Further information .........................................................
CHAPTER 1 2 General Information This section provides general information and technical specifications about the POC-S175 Sections include: • Introduction • Specifications • LCD Specifications • Dimentions
Chapter 1 General Information 1.1 Introduction The POC-S175 is a multimedia Pentium® Mobility processor-based computer that is designed to serve as a Point of Care terminal (POC.) It is a PC-based system with 17" color TFT LCD display, on-board PCI Ethernet controller, dual COM port interfaces and a 16-bit stereo audio controller. With a built-in 2.5” HDD drive, and CF card sockets, the POC-S175 is as slim and user-friendly as a notebook computer and low audible noise.
• Memory: 1 x 200 pin SO-DIMM sockets, support ECC Double DataRate (DDR)128 MB to 512 MB, accept 128/256/512 MB DDR200/ 266DRAM (855GME could support to DDR333 DRAM) • System chipset: Intel 855GME or 852GM GMCH/ ICH4 Chipset 400 MHz PSB • BIOS: Award 256 KB Flash BIOS, supports Plug & Play, APM • Serial ports: Two RS-232 ports with optical isolation. All ports are compatible with 16C550 UARTs • Universal serial bus (USB) port: Supports up to two USB ports • Watchdog timer: 62-level, interval 1 ~ 62 seconds.
1.2.6 Touchscreen (Optional) Table 1.1: Type Analog Resistive Resolution Continuous Light Transmission 75% Controller RS-232 interface (uses COM4) Power Consumption +5V@200 mA Software Driver Supports Windows 2000,Windows XP Durability (touches in a lifetime) 30 million Table 1.2: Table 1.1:Touhscreen specification Note The Point of Care Terminal with the optionally installed touchscreen will share COM4. Once the touchscreen is installed, COM4 cannot be used for other purposes. 1.2.
• This device bears the CE label in accordance with the provisions of the EMC Directive 89/336/EMC and the Low Voltage Directive 73/23/ EEC. 1.2.9 Cleaning/Disinfecting During normal use of the POC-S175 may become soiled and should, therefore, be cleaned regularly. Agents: Green tinctured soap and Enzymatic detergents Steps: 1. Wipe the POC-S175 with a clean cloth that has been moistened in the cleaning solution. 2. Prepare agent per manufacturer’s instructions or hospital protocol. 3.
• LCD MTBF: 50,000 hours • Backlight lifetime: 50,000 hours (typical) 1.4 Dimensions Figure 1.
CHAPTER 2 2 System Setup This section gives a quick tour of the POC-S175 including installation procedures, BIOS Setup, and software and driver installation
Chapter 2 System Setup 2.1 A Quick Tour of the POC-S175 Before you start to set up the POC-S175, take a moment to become familiar with the locations and purposes of the controls, drives, connections and ports, which are illustrated in the figures below. When you place the POC-S175 upright on the desktop, its front panel appears as shown in Figure 2-1 . Figure 2.
When you turn the Point of Care Terminal around and look at its rear cover, the sunken I/O section is at the bottom of the panel PC, as shown in Figure 2-2. (The I/O section includes various I/O ports, including serial ports, VGA port, the Ethernet port, USB ports, the microphone jack, and so on.) Figure 2.
2.2 Installation Procedures 2.2.1 Connecting the power cord The POC-S175 could only be powered by a DC power adapter (XPiQ Model no.PCM80PS24). Be sure to always handle the power cords by holding the plug ends only. Follow these procedures in order: 1. Connect the female end of the power adapter to the DC jack of the panel PC. (See Figure 2-3.) 2. Connect the female end of the power cord to the DC power adapter 3. Connect the 3-pin male plug of the power cord to an electrical outlet. Figure 2.
2.2.2 Connecting the keyboard and mouse 1. Connect the Y-shaped adapter to the PS/2 mouse and keyboard port on the I/O section of the POC-S175. (See Figure 2-4.) 2. Connect the PS/2 mouse and keyboard to the Y-shaped adapter. (See Figure 2-4.) Figure 2.4: Connecting the mouse and keyboard 2.2.3 Switch on the power Switch on the reset switch on the rear cover. (See Figure 2-5.) 2.2.4 Connecting the COM ports (COM 1,2) Figure 2.
2.3 Running the BIOS Setup Program Your POC-S175 is likely to have been properly set up and configured by your dealer prior to delivery. You may still find it necessary to use the BIOS (Basic Input-Output System) setup program to change system configuration information, such as the current date and time or your type of hard drive. The setup program is stored in read-only memory.
If you are presented with the opening screen of a setup or installation program, follow the instructions on screen. The setup program will guide you through preparation of your hard drive, and installation of the operating system. 2.5 Installing the Drivers After installing your system software, you will be able to set up the Ethernet, VGA, audio and touchscreen functions by your own external CDROM drive.
POC-S175 User Manual 14
3 CHAPTER 2 PCI Bus Ethernet Interface This section includs information about the high-performance Ethernet network chipset
Chapter 3 PCI BUS Ethernet Interface 3.1 Introduction The POC-S175 is equipped with a high-performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems. It is also both 100Base-T and 10Base-T compatible. 3.2 nstallation of Ethernet Driver 3.2.1 Installation for Windows 2000/XP Complete the following steps to install the LAN driver.
Figure 3.
3.3 Further information For further information about the Ethernet installation in your POCS175, included Driver updates, troubleshooting guides and FAQ lists please visit the following web resources. Realtek website: www.intel.com.tw Advantech websites: www.advantech.com www.advantech.com.
4 CHAPTER 2 PCI Graphic Setup This section describes the PCI Graphics card setup and driver installation.
Chapter 4 PCI Graphic Setup 4.1 Introduction The POC-S175 has an onboard PCI/AGP flat panel interface. The specifications and features are described as follows: 4.1.1 Chipset The POC-S175 uses a Intel 855GME/852GM for its graphic controller. It supports LVDS LCD displays, and CRT monitors. 4.1.
Note2 means pressing the “Enter” key on the keyboard. Note3 Before you install the graphic driver of POC-S175, please ensure you have installed the INF driver of the Intel 855GME/852GM chipset. You can find this driver in the Utility CD-ROM.
4.2.1 Installation for Windows 2000/XP Figure 4.
4.3 Further information For further information about the AGP/SVGA installation in your POCS175, included Driver updates, troubleshooting guides and FAQ lists please visit the following web resources. Intel website: www.intel.com.tw Advantech websites: www.advantech.com www.advantech.com.
POC-S175User Manual 24
CHAPTER 5 2 Audio Interface This section explains the audio interface of the POC-S175 and installation of the Windows 2000/XP drivers
Chapter 5 Audio Interface 5.1 Introduction The POC-S175's onboard audio interface provides high-quality stereo sound and FM music synthesis (ESFM) by using the ALC202 audio controller from Realtek. The audio interface can record, compress, and play back voice, sound, and music with a built-in mixer control. The POC-S175's onboard audio interface also supports the Plug and Play (PnP) standard and provides PnP configuration for audio, FM, and MPU-104 logical devices.
5.2.1 Installation for Windows 2000/XP Figure 5.
5.3 Further information For further information about the Audio interface installation in your POC-S175, included Driver updates, troubleshooting guides and FAQ lists please visit the following web resources. Realtek website: www.realtek.com.tw Advantech websites: www.advantech.com www.advantech.com.
6 CHAPTER 2 Touchscreen Interface This section explains the Touchscreen Interface including its specifications, operating conditions, and driver installation for Windows 2000/XP
Chapter 6 Touchscreen Interface 6.1 Introduction 6.1.1 General Information The POC-S175's optional touchscreen incorporates advanced secondgeneration 5-wire resistive technology. They allow 75% light transmission respectively. The resistive and capacitive models have an antiglare surface. All models provide greatly enhanced visual resolution. They also have new improved scratch-resistant features. The touchscreen is manufactured from UL-recognized components.
• Turpentine • Mineral spirits • Foods and beverages 6.2 Installation of Driver for Touchscreen To facilitate installation of the touchscreen driver, you should read the instructions in this section carefully before you attempt installation. Important The following windows illustrations are examples only. You must follow the flow chart instructions and pay attention to the instructions which appear on your screen. Note1 The external CD-ROM drive is designated as “D” throughout this chapter.
6.2.1 Installation for Windows 2000 Figure 6.
6.2.2 Installation for Windows XP Figure 6.
6.3 Further information For further information about the Touchscreen installation in your POCS175, included Driver updates, troubleshooting guides and FAQ lists please visit the following web resources. Elo website: www.elotouch.com Advantech websites: www.advantech.com www.advantech.com.
A APPENDIX 2 VESA Mounting The following section explains how to install the VESA mounting system for the POC-S175
Appendix A VESA Mounting A.1 Install VESA Mounting The POC-S175 also provides standard VESA mounting to help system integrators conveniently integrate the panel PC into their system. Never use the mounting brackets except for providing by Advantech to prevent the unreliable fixing of POC-S175. VESA mount installation should be operated by professional technician, please contact the service technician or your retail if you need this service. Installation instructions follow: 1.
Figure A.
POC-S175 User’s Manual 38