User Manual PIT-1501W Patient Infotainment Terminal/Computer
Copyright The documentation and the software included with this product are copyrighted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Technical Support and Assistance 1. 2. Warning! Visit the Advantech web site at www.advantech.com/support where you can find th latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. Keep this equipment away from humidity. Put this equipment on a reliable surface during installation.
17. CLASSIFICATION: Supplied by Class I adapter No applied parts Continuous operation No AP or APG category 18. Follow national requirements to dispose of unit. 19. Maintenance: To properly maintain and clean the surfaces, use only approved products or clean with a dry cloth. 20. Contact information: No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei, Taiwan 114, R.O.C TEL: (02) 2792-7818 21. ñ ñ ñ ñ 22. 23. This equipment is not to be used as a life support system.
PIT-1501W User Manual vi
Contents Chapter Chapter 1 Introduction..........................................1 1.1 1.2 Overview ................................................................................................... 2 System Configuration................................................................................ 4 2 Hardware Description .........................5 2.1 General Specifications .............................................................................. 6 2.1.1 Standard PC Functions ............
PIT-1501W User Manual viii
Chapter 1 1 Introduction This Chapter briefly introduces the PIT-1501W product.
1.1 Overview The PIT-1501W Patient Infotainment Terminal is Advantechís standard product with a built-in Windows XP Embedded OS. In addition to providing hospital bedside patient information, remote monitoring, and care functions, the CPU and the LANenabled architecture of the PIT-1501W terminal also serves as an integrated hospital gateway device. The PIT-1501W equipped with an Intel Atom 1.6GHz processor, 15.
2 3 2 7 1 1 4 5 8 9 6 1. Light Indicators 2. WIFI 3. Built-in 1.3 Mega-pixel CMOS Camera (optional) 4. Phone handset (optional) 5. Wired Remote Controller (optional) 6. RFID reader 7. Touch Screen 8. Nurse call with hard wire 9. Bottom I/O Arrangement (Mic-in, Line out, USB port ,Smart Card Reader) 10. Vesa Mounting /heat sink (75/100 compatible) 11. Access Door for CF card 12. Access Door for Hard drive and TV tuner Module.
1.2 System Configuration The block diagram of a PIT-1501W Patient Infotainment Terminal based on Hospital bedside environment is shown in the following diagram: Silverthorne XL 437 FCBGA8 1.6GHZ / FBS=533MHz FSB 533/400 Analog RGB CRT Conn. LVDS TFT 18 x2 bit LVDS Connector 200pin DDR2-SO-DIMM X 1 Intel 945GME DDR2 533/667 MT/S (Calistoga) Chrontel CH7308B SDVO TO I/O PCM-093 USB x 3 LVDSTFT 24 x2 bit USB Portx1 (180D) DMI PCI BUS 3.3V 33MHZ IDSEL:AD27 (PIRQC/A#, GNT#1, REQ#1) USB 2.
Chapter 2 2 Hardware Description This Chapter describes the hardware features of the PIT-1501W.
2.1 General Specifications 2.1.1 Standard PC Functions ! ! ! ! ! ! ! ! ! ! ! ! CPU: Silverthorne XL 1.6GHz BIOS: Award 1024K x 8 (8 Mbit) Flash BIOS Chipset: Intel 945GME + ICH7M Front side bus: Supports 400/533 MHz Memory: DDR2 SODIMM 400/533 MHz up to 2 GB Audio: HD audio codec ALC888 + 2 x 2.
2.2 Mechanical Specifications 2.2.1 Mechanical Specifications (Terminal) ! System Dimensions: 418 (W) x 308.4 (H) x65 (D) mm Front Cover: Rear Cover: ! ! ! ! Carton Dimensions: 620 (W) x 540 (H) x 180 (D) (excludes accessories box) Mounting System: Back box for wall mounting Gross Weight: 7.0 kg Net Weight: 5.
2.2.
Front Cover: Rear Cover: ! ! ! ! Carton Dimensions: 620 (W) x 540 (H) x 180 (D) (exclude accessories box) Mounting System: Back box for wall mounting Gross Weight: 7.0 kg Net Weight: 5.
2.2.
Front Cover: Rear Cover: ! ! ! ! Carton Dimensions: 620 (W) x 540 (H) x 180 (D) (exclude accessories box Mounting System: Back box for wall mounting Gross Weight: 7.0 kg Net Weight: 5.
2.2.4 Mechanical Drawing for Button I/O Mic In MIC Line Out USB USB Smart Card Line Out Remote controller Conn Hand-Set Conn 2.2.5 Mechanical Drawing for Rear I/O External Switch Controller DC in LAN USB Reserved port *External Switch Controller: Control port for LCD on/off switch on front panel.
2.3 External View 2.3.
2.3.2 Side View 2.3.
Chapter 3 3 Software Description This Chapter describes the software features of the PIT-1501W.
3.1 Windows XP Embedded Software Specifications Real-Time OS Kernel ! Windows XPE 7 Language Version Driver List ! ! ! ! ! ! ! ! Chipset Graphics Audio LAN Camera Smartcard reader Touch WLAN PIT-1501W User Manual Intel US15W Intel GMA500 Realtek Audio ALC880 Marvell Yukon Ethernet Controller D-Max UVC 1.3M Webcam ALCOR micro USB smartcard reader Elo TtouchSys. 2216 AccuTouch@USB Qcom WIFI module 16 Rev: Rev: Rev: 5.10.0.5512 Rev: 8.61.7.3 Rev: 6.11.200.4 Rev: 5.11.9520.7 Rev: 4.4.0.0 Rev:1.2.3.
Embedded Application Software ! Advantech SUSI SUSI Demo Program 1. LED Indicator Control.
2. LCD Panel Brightness Control. 3. Nurse Call (GPIO function) Control. Search for more information in *D:\Drivers for PIT-1501W series\Advantech\SUSI Documentations. Note! The CD-ROM drive is designated as D.
Chapter 4 4 Design Requirements This Chapter describes the design requirements of the PIT-1501W.
4.1 Environmental Specifications Temperature & Humidity ! Operating Temperature: 0 ~ 40° C ! Storage Temperature: 0 ~ 60° C ! Relative Humidity: 0 ~ 95% RH (Non-condensed) Case / Panel Temperature ! Less than 40° C @ 25° C ambient temperature (front bezel) Safety ! CE EMI ! FCC class B approved Vibration: ! 10 ~ 18 Hz, 1.5 mm peak-to-peak displacement ! 18 ~ 500 Hz, 1 G acceleration 4.
Chapter 5 5 Installation This Chapter describes the installation of the PIT-1702.
5.1 Installation for Terminal Step 1. Fix Hook. Step 2. Fix ARM + Handset Bracket + Remote Control Bracket.
5.2 Installation for Handset Step 1. Fix Hook. Step 2. Fix ARM + Handset Bracket + Handset.
5.3 Installation for Remote Controller Step 1. Fix Hook. Step 2. Fix ARM + Handset Bracket + Remote Control Bracket.
5.4 Installation for Arm Step 1. Fix Hook. Step 2. Fix ARM + Handset Bracket + Handset.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies.
