User manual

19 PDC-190S User Manual
Appendix A OSD Selections
A.8 Color Descriptions*
Selecting this control allows you to make adjustments to the Gamma and color tem-
perature level of the display screen.
Use the key on the front bezel to adjust the contrast any time the OSD is on.
Figure A.2 Item Color in OSD display
A.8.1 Auto Color*
Selecting this control allows you to adjust the color intensity, and color tones of input
signal automatically.
A.8.2 Color Temperature*
Selecting this control allows you to select the appropriate gamma/color temperature
mode based on your requirements. Four modes are listed as below:
Note! This setting is only available on D-sub & video input, S-Video, compos-
ite, component/RGBS, SDI.
Mode Function
6500K 2.2
Color Temp: 6500K
Gamma: 2.2
6500K DICOM
Color Temp: 6500K
Gamma: DICOM Preset
4300K Endoscope
Color Temp: 4300K
Gamma: Endoscope Gamma
9300K 2.2
Color Temp: 9300K
Gamma: 2.2
User 2.2
Color Temp: Customer config
Gamma: 2.2