User manual

PDC-190S User Manual 8
2.1 Location and Function of Parts and Controls
Before you start to set up the PDC-190S, take a moment to become familiar with the
locations and purposes of the controls, drives, connectors and ports, which are illus-
trated in the figures below. When you place the PDC-190S upright on the desktop, its
front panel appears as shown in Figure 2.1.
Figure 2.1 Front Panel of PDC-190S
Table 2.1: Control Buttons of PDC-190S
No Control Function
Power Indicator
Power Status
When the power is turned on for the first time and
video signal is detected, the LED light is green.
When no signal is detected, the LED is blinking red.
When the power is turned off, the LED is dark.
Power Button
Power control
Press to power on/off the LCD monitor.
Source
Input select buttons
Press the button to monitor the signal input to each
connector.
MENU Up
Press to select items
Scroll up through the adjustment items.
MENU Down
Press to select items
Scroll down through the adjustment items.
Decrement
*Volume down (Avail-
able when OSD not
active)
Press to select the setting values
Decreases value of the adjustment items.
(*Decreases speaker volume when OSD not active)
Increment
*Volume up (Available
when OSD not active)
Press to select the setting values
Increases value of the adjustment items.
(*Increase speaker volume when OSD not active)