User manual

PCM-9590 User Manual 30
 USB KB Wake-Up From S3 [Enabled]
This item allows user to enable using a USB keyboard, and allow a keystroke to
wake up the system from power saving mode.
 Resume by Alarm [Disabled]
This item allows user to enable and key in Date/time to power on system
3.2.7 PnP/PCI Configurations
 Init Display First [PCI Slot]
This item is setting for start up Video output from PCI or Onboard device.
 Reset Configuration Date [Disabled]
This item allow user to clear any PnP configuration data stored in the BIOS.
 Resources Controlled By [Auto (ESCD)]
– IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3, 4, 5, 7,
9, 10, 11, 12, 14, and 15.
– DMA Resources
This item allows you respectively assign an interruptive type for DMA, 0, 1, 2, 3,
4, 5, 6, and 7.
Disabled Disable this function.
Enabled Enable alarm function to power on system.
Data (of month) Alarm 1-31
Time (HH:MM:SS) Alarm (0-23) : (0-59) : 0-59)
Note! This “PnP/PCI Configurations” option is setting up the IRQ and DMA
(both PnP and PCI bus assignments.