User manual

23 PCM-9590 User Manual
Chapter 3 BIOS Operation
 Drive A / Drive B
The Item identifies the types of floppy disk drive A or drive B.
 Halt on
The item determines whether the computer will stop if an error is detected during
power up.
 Base Memory
The POST of the BIOS will determine the amount of base (or conventional) mem-
ory installed in the system.
 Extended Memory
The POST of the BIOS will determine the amount of extended memory (above
1MB in CPU’s memory address map) installed in the system.
 Total Memory
This item displays the total system memory size.
None No floppy drive installed
360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity
1.2M, 5.25" 5.25 inch AT-type high-density drive; 1.2M byte capacity
720K, 3.5" 3.5 inch double-sided drive; 720K byte capacity
1.44M, 3.5" 3.5 inch double-sided drive; 1.44M byte capacity
2.88M, 3.5" 3.5 inch double-sided drive; 2.88M byte capacity
No Errors The system boot will not stop for any error.
All Errors Whenever the BIOS detects a non-fatal error the system will be stopped.
All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other
errors. (Default value)
All, But Diskette The system boot will not stop for a disk error; it will stop for all other
errors.
All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for
al other errors.